JVC LPT0923-001A manual Live Memory Playback, Temporary recording for Live Memory

Page 41

BASIC OPERATIONS ON HDD DECK EN 41

Live Memory Playback

●Turn on the unit.

●Turn on the TV and select the AV mode.

●Slide the TV/CABLE/SAT/DVD switch to DVD.

●Press HDD so that the HDD lamp lights up on the unit.

This unit records pictures onto the hard disc, instead of video tapes, then plays back the pictures recorded on the disc. This makes it possible to achieve high-speed writing and read-out that has not been possible with conventional VCRs, enabling recording and playback simultaneously.

 

High-speed spin

Recording

Playback

(High-speed writing)

(High-speed read-out)

Image figure of the hard disc

It is called “Live Memory Playback” to start playback of the programme being recorded, with a time-lag between a recording point and a playback point, as shown in the figure below.

Current playback point (Live Memory Playback)

 

 

 

Current recording position

Recording start point

 

(Recording point)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Playback

 

Recording

 

 

 

continues

 

continues

0

30 min.

1 hour

Currently elapsed recording time

Not only can this unit play back a programme previously recorded while recording or timer recording another programme, but the unit also allows you to play back from the beginning of a programme while continuing to record the same programme.

Temporary recording for Live Memory

This unit automatically records the channel being received, within the specified range of time, to the reserved space on the hard disc. The time range can be set for 30 minutes, 1 hour, and 3 hours.

( pg. 68)

NOTE:

Previous temporary recordings will be overwritten since the unit is always recording the channel being received. Thus, it is not possible to play back TV programmes recorded beyond the specified range of time since they are already overwritten. To avoid this in order to save titles, perform normal recording ( pg. 38), timer recording ( pg. 44, 46), or Live Memory Recording ( pg. 43).

About limitation on temporary recording

The temporary recording for Live Memory is cancelled in the following cases, and will start all over again when it is to resume.

●When the power is turned off

●When the system is powered again after a power failure was occurred

●When normal recording, timer recording, Live Memory Recording, or Automatic Satellite Programme Recording ( pg. 48) is performed

●When the “LIVE MEMORY” setting is changed ( pg. 68)

●When tuner channel setting is performed ( pg. 70)

●When dubbing is performed by pressing DUBBING ( pg. 56)

●When “DV” is selected by pressing PR +/– ( pg. 58)

Recording/playback Status Display

CABLE/SAT

TVDVD

LIVE

ON SCREEN

Live Memory Playback status can be checked by pressing ON SCREEN to display the bar meter on the superimpose display. The current status is superimposed on the TV screen. ( pg. 15, “When using Live Memory playback”)

NOTES:

●Live Memory Playback cannot be performed for approximately 30 seconds after recording has started.

●Although high-speed search up to approximately 30 seconds before the current recording point is possible during Live Memory Playback, once the current recording point is reached, the unit resumes normal playback and maintains a delay of approximately 30 seconds so that recording and playback can continue.

●When using Live Memory Playback during timer recording, playback continues even after the end of the recording.

●When using Live Memory Playback during timer recording, playback is automatically stopped just before recording starts, and then recording starts when the time arrives for the next timer-programme.

●It is impossible to perform ITR even if you press 7 during Live Memory Playback. ( pg. 39)

Press 8 to display the programme being recorded, then perform ITR settings.

●Playback may be paused for a moment during Live Memory Playback, which does not interfere with recording.

●Live Memory Playback cannot be performed while recording the source from DV input. ( pg. 58, “DV Dubbing”)

●When LIVE CHECK is pressed to display the picture currently being recorded, the picture size may not be correct.

●Press 7 or LIVE to stop Live Memory Playback.

Page 40 Page 42
Image 41
Page 40 Page 42
Contents DR-MH30S DR-MH20S Mains outlet Safety PrecautionsDo not place the unit For ItalyDo not block the unit’s ventilation openings or holes To mobile phone usersContents Recordable/playable Discs About DiscsDVD-RAM Discs DVD-R/RW DiscsRegion Number Discs For Playback OnlyVideo CD/Super Video CD Audio CDFile Structure Of Discs Recording Medium And FormatPlacing a Disc DVD Video MarksCare And Handling Of Discs Maintenance of discsLabel side Recording sideFront View To access covered connectors, pull Open the connector coverRear View C D E F G HFront Display Panel How To Use Remote ControlWhen pressing 7 during recording When pressing REC ModeWhen recording On-Screen Display DVD deckWhen watching a programme on air When playing back a recorded titleWhen using Live Memory playback When recording When pressing REC Mode Appears for eight secondsOn-Screen Display DV Dubbing When capturing images from the external DV equipmentConnected DV equipment information Elapsed recording timeBasic Connections When your TV’s Scart Set L-1 Output to Connector acceptsAfter Auto Set Up is completed, perform Monitor Set on Auto Set UpBefore starting, make sure of the following ENTER. The Language SetWeNOTES Preset DownloadSet/Auto Guide Program Number Set Link Functions On The Front Display PanelOn-screen Language Set LanguagePan&Scan/Letter Box Monitor SetPan&Scan Letter BoxInstalling Satellite Controller 60, 61, 62, 63 Check the result of the test64, 65 64, 78Basic Playback High-Speed Search Playback FeaturesSlow Motion Still Picture/Frame-By-Frame PlaybackSkip Search To mark positionsSubtitle Selection Checking The Time Information Angle SelectionPlayback Control PBC Function Audio Language/Sound SelectionAudio Channel Selection One Touch Replay FunctionHow To Access The On-screen Bar Using The On-screen BarContents of the on-screen bar during playback Basic Operation On The On-screen BarRepeat Playback Time Search Adjusting The Picture QualitySimulated Surround Effect Programme Playback Setting The Progressive ModeRandom Playback Parental Lock To Change The SettingsTo Set Parental Lock For The First Time To Temporarily Release Parental LockRecording Resume Function Recording ModeBasic Recording Instant Timer Recording ITR Recording FeaturesWatch Another Programme While Recording On The Unit Elapsed Recording Time And Disc Remaining Time IndicationFree Rate Function Select FR Just in a recording mode selection procedureSelection Of The Audio Channel To Be Recorded On a Disc Type of Broadcast BeingPause recording on HDD deck Receiving Stereo And Bilingual Programmes During playback, press Basic Playback Playback FeaturesTemporary recording for Live Memory Live Memory PlaybackRecording/playback Status Display About limitation on temporary recordingMessage appears by pressing this button during timer Returns to on air programme screen. When a confirmationAvailable only when paused Previous screenJump Search 5x Speed SearchTo Resume Playback Of a TV Broadcast From The Paused Point Press Jump or Jump +Satellite Receiver Users Timer ProgrammingVPS/PDC Recording Weekly/Daily RecordingFor the HDD deck For the DVD deckRelief Recording Manual Timer ProgrammingCheck Programmes Cancel And Change ProgrammesPress HDD or DVD to choose the recording deck RecordingIcons and their meanings About registration of informationLimitations of registration Scan For Beginning Of Title Modify Original InformationModify Index Modify Title NameProtect Title DVD deck only Modify CategoryDelete Title To modify the points Press Edit or ReturnDivide Title Modify Play List InformationModify Chapter Press w e to select PREVIEW, then press EnterAdd scenes Create Play ListMove Scenes Delete ScenesDelete Play List Modify Library InformationModify Play List Name Scan For Title From LibraryPress Navigation Locating The Desired Group And TracksPress rt to select the desired group, then press Enter RecordedDubbing Cancel Select this to cancel dubbing operationHigh Speed Dubbing From HDD To DVD Just Dubbing From HDD To DVDWhen performing the Manual Dubbing When performing the Just DubbingManual Dubbing From HDD To DVD Original Dubbing From DVD To HDDTo skip unwanted part of the source picture DV DubbingEdit From a Camcorder If the camcorder has no S-VIDEO output connectorIf the camcorder has an S-VIDEO output connector When using your unit as the source player Output/Input Set Output And L-1 Input SettingSelect Setting Example Dubbing to an MD Input SettingDigital Audio Dubbing Remote Control 1/2/3/4 Code Switching Remote Control FunctionsTV Multi-Brand Remote Control Keep pressing SET UP down during stepReceiver 1, PR +/-,number keys Perfect Connections Recommended Simple ConnectionsOr An Amplifier With Built-in DTS Connecting/Using a DecoderREC, then press Enter Mode SetPress rt to select Audio This function works only for the Nicam bilingual programme Disc Play SET UP REC/PLAY SET UPDuring Power Save mode Scan Mode SetPower Save does not work when Scan mode cannot be set while menu screen is displayedTuner Set Showviewtm System SetupGuide Program Number Set Auto Channel SetManual Channel Set Fine-Tuning Channels Already Stored When Receiving a Scrambled BroadcastDelete a Channel Change Station Channel PositionJust Clock Clock SetFormat a Disc DVD Deck Only Impossible to restore themUP, then press t Some DVD-RAM/RW discs are unformattedAfter finalising For DVD-R/RW Video mode discs Cancel The Finalisation Of a DVD-RW DiscFinalise a Disc DVD Deck Only Finalise a DVD-R/RW DiscTray Lock DVD Deck Only Help FunctionTo lock tray To unlock trayInitialising DVD Deck Only Playback DVD DeckGeneral Playback HDD DeckPower failure occurred Set date and time correctly.  pg Timer RecordingRecording DVD Deck Recording HDD DeckOn-screen Message Other ProblemsFor basic/S-video connection For component video connectionDuring Live Memory playback, 8 has been pressed.  pg Timer recording has finished during Live Memory playbackAn invalid Showview number has been input.  pg Power consumption Power requirementTemperature Dimensions WxHxDLanguage Code List Country/Area Code List for Parental Lock EN Appendix TV Station And ID List Audio Language/Sound Selection Select The Switching Interval Of The Slide ShowElapsed Recording Time Indication Still Picture/Frame-By-Frame PlaybackMemo EN DR-MH30S DR-MH20S
Top Page Image Contents