JVC LPT0923-001A manual Manual Channel Set

	SUBSIDIARY SETTINGS EN 71
8 View the Confirmation screen.	Manual Channel Set
“AUTO SET COMPLETED” or “SCAN COMPLETED” is displayed
	Store channels that were not stored during Auto Set Up
on the TV screen.
9 Press SET UP to complete the setting.	( pg. 18), Preset Download ( pg. 19) or Auto Channel Set
	( pg. 70).
● Using the Confirmation screen, you can skip or add channel
	1 Press SET UP to access the Main Menu screen.
positions, enter station names and perform other operations. Refer to
pages 71 – 72 for the procedures.	2 Press w e to select “INITIAL SET UP”, then press t.
● Depending on reception conditions, the stations may not be stored in
	3 Press w e to select “TUNER SET”, then press t.
order, and the station names may not be stored correctly.
● For information on scrambled broadcasts, refer to “When Receiving A	4 Press rt w e to select “MANUAL CH SET”, then press
Scrambled Broadcast” ( pg. 72).	ENTER. The Manual Channel Set screen appears.

IMPORTANT:

●In certain reception conditions, station names may not be stored correctly, and Auto Guide Program Number Set may not work properly. When the Guide Program numbers are not set properly, the programme that you do not intended to record will be timer- recorded by the SHOWVIEW system of the unit. When programming the timer using the SHOWVIEW system, be sure to check the desired channel is selected correctly. ( pg. 44, “SHOWVIEWTM Timer Programming”)

●Your unit memorises all receivable stations even if reception of some of them is poor. You can delete those stations with an unacceptable picture from the list. ( pg. 72, “Delete A Channel”)

NOTES:

●Fine tuning is performed automatically during Auto Channel Set. If you want to perform tuning manually, refer to “Fine-Tuning Channels Already Stored” ( pg. 72).

●If you perform Auto Channel Set when the aerial cable is not connected properly, “SCAN COMPLETED –NO SIGNAL–” appears on the TV screen in step 8. In such a case, make sure of the aerial connection and press ENTER; Auto Channel Set will start again.

●If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Set Up, the TV system setting for those channels may be incorrect. Select the appropriate TV system for those channels. ( pg. 72, “INFORMATION”)

5 Press w e to select “EDIT”, then press ENTER.

6 Press rt w e to select a	(Example) To store in position 12.
blank position in which you want to
		INITIAL SET UP > MANUAL CH SET
store a channel, then press		PR		CH		ID		CH CH		ID
ENTER. The Confirmation screen
		01		C01	----			07		----
appears.		02	02		CTEA			08		----
		03	05		1000			09		----
7 Press rt to select “BAND”,		04		C79		3SAT		10		----
		05	01			9LIV		11		----
then press ENTER.		06	04			AB3		12		----
		<		>			MOVE		EDIT	RETURN

	The programme currently
	received on the selected channel
	position appears behind the
	confirmation screen.
8 Press rt to change the band	INITIAL SET UP > MANUAL CH SET
between CH (regular) and CC	BAND			CH
(cable), then press ENTER.
	CH			2
9 Press rt to select “CH”, then	ID			----
	FINE
press ENTER.	DECODER			OFF
10 Press rt to input the				RETURN
channel number you want to store.	SET UP	ENTER	SELECT WITH [	] THEN PRESS [ENTER]
	EXIT	SELECT	PRESS [SET UP] TO EXIT
● To enter the registered station
name ( pg. 85), press rt to
select “ID”, then press ENTER. Press rt.
● For fine tuning adjustment, press rt to select “FINE”, then press
ENTER. Press rt to perform fine-tuning.
● When storing a channel that sends scrambled broadcasts, press rt
to select “DECODER”, then press ENTER. Press rt to set
“DECODER” to “ON” (“OFF” is the default setting).
● When “L-2 SELECT” is set to “VIDEO”, “S-VIDEO”, “SAT VIDEO” or
“SAT S-VIDEO”, the “DECODER” setting cannot be changed.
( pg. 61)

11 Press ENTER to enter new channel information. The Confirmation screen appears.

12 Press SET UP to close the Confirmation screen.

●To change positions, see “Change Station Channel Position” ( pg. 72).

●If you wish to set station names other than the ones registered in your unit, see “Set Stations (B)” ( pg. 72).

ATTENTION:

Guide Program numbers are not set when channels are stored manually. ( pg. 70, “SHOWVIEWTM System Setup”)