Timer Programming, Satellite Receiver Users

44 EN TIMER RECORDING

SHOWVIEW

Timer Programming

7 The SHOWVIEW number you entered and the matching timer-

recording information are displayed on the TV screen. Check the

programme data.

You can programme this unit to timer-record as many as

● To cancel this setting, press RETURN.

32 programmes.

With the SHOWVIEW system, timer programming is greatly

IMPORTANT:

simplified because each TV programme has a corresponding code

Make sure the channel position number you wish to record is

number which your unit is able to recognize.

displayed; if not, see “SHOWVIEWTM System Setup” ( pg. 70) and set

You can use the remote control to enter the SHOWVIEW number.

the Guide Program number correctly.

8 Press rt to select the desired recording option as required.

● Make sure that the unit’s built-in clock is set properly.

● Turn on the unit.

Press rt to select the desired setting, then press ENTER.

● Turn on the TV and select the AV mode.

● “INPUT TITLE” ( pg. 50, “Modify Title Name”)

● Slide the TV/CABLE/SAT/DVD switch to DVD.

● “CATEGORY” ( pg. 51, “Modify Category”)

● “VPS/PDC” ( pg. 45, “VPS/PDC Recording”)

CABLE/SAT

● “WEEKLY/DAILY” ( pg. 45, “Weekly/Daily Recording”)

DVD

● “REC MODE” ( pg. 35, “Recording Mode”)

9 Press rt to select “OK”, then press ENTER to access the

Programme Confirmation screen.

0 – 9

10 Press w e to select “EXIT”, then press ENTER to complete

timer programming.

● To programme another timer, press w e to select “CONTINUE”, then

CANCEL

press ENTER.

PROGRAMME

● If “PROGRAMME OVERLAPPED” appears on the TV screen, see

page 47.

ENTER

NOTES:

RETURN

● There may be cases that SHOWVIEW Timer Programming function

prolongs the stop time of the programming.

● When two successive programmes are recorded on a DVD-RW disc

with SHOWVIEW Timer Programming function, the beginning of the

CLEAR

second one may be left off the recording.

● If the copy limited programme is received during timer-recording, the

unit enters Record Pause mode. Recording starts again if it is

DISPLAY

switched to a recordable broadcast during the time you programmed.

VPS/PDC#

IMPORTANT:

If you have moved to a different area or if a broadcasting station’s

channel number has been changed, the wrong channel number will

be displayed on the SHOWVIEW programme screen in step 7. When

1 Load a recordable disc if recording to DVD.

this happens, set the correct Guide Program number for that station.

( pg. 70, “SHOWVIEWTM System Setup”)

2 Press PROGRAMME to access the programme top screen.

3 Press rtw e to select “SHOWVIEW”, then press ENTER.

Satellite Receiver Users

● When “PROGRAMME FULL DELETE UNWANTED TIMER

To timer-record a satellite broadcast using the SHOWVIEW

PROGRAMMES” appears on the TV screen, you need to cancel

system:

some of the reserved programmes. ( pg. 47)

A Perform “Satellite Receiver Control Setting” ( pg. 23).

4 Press the number keys to

B Perform “SHOWVIEWTM Timer Programming” ( pg. 44).

123

PROGRAMME > SHOWVIEW (1/2)

C Leave the satellite receiver’s power on.

enter the SHOWVIEW number of a

programme you wish to record.

SHOWVIEW NO.

1 2 3 4

Press rtw e to select the desired number key on the screen, then press ENTER. Repeat to enter all needed numbers.

SELECT WITH [ ] THEN PRESS [ENTER]

PRESS [PROGRAMME] TO EXIT

PROGRAMME ENTER

EXIT SELECT

		4	5		6

		7	8		9

	DELETE		0	DELETE ALL

RECORD TO						DVD

					CONFIRM

5 Press rt to select “RECORD TO”, then press ENTER. Press rt to select the desired recording deck, then press ENTER.

6 Press rtw e to select “CONFIRM”, then press ENTER.

●If the number you entered is invalid, “SHOWVIEW NO. ERROR CONFIRM SHOWVIEW NO. THEN RETRY” appears on the TV screen. Input a valid SHOWVIEW number.

●If “GUIDE PROGRAMME IS NOT SET SET GUIDE PROGRAM THEN RETRY” appears on the TV screen, set Guide Program Numbers manually. ( pg. 70)