58 EN EDITING
|
| DV Dubbing | 1 Connect a camcorder or DV equipment to the DV IN connector | ||||||||||
|
| ||||||||||||
|
| on the unit’s front panel. |
|
|
|
|
| ||||||
|
|
| 2 Press HDD. |
|
|
|
|
| |||||
You can dub programmes from a camcorder or DV equipment |
|
|
|
|
| ||||||||
3 Press PR +/– to set the channel to “DV”. |
|
|
| ||||||||||
connected to the unit with a DV cable. The unit’s remote control |
|
|
| ||||||||||
allows you the limited control of the connected camcorder or DV | ● The |
|
|
| |||||||||
equipment functions during dubbing. | 4 Press w e to select |
|
|
| , then press ENTER to display | ||||||||
|
|
| |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| the remote icon (facing to the right) for the DV equipment. |
| |||||||||
NOTES: | 5 Press w e to select | FR360 | 00:00:00. 00 |
| 00:00:00. 00 | L – R | |||||||
● Use the DV cable |
|
| , then press ENTER |
| |||||||||
|
|
|
|
|
|
|
|
| RW | 0:00 | 1:00 | 2:00 | DV |
|
|
|
|
|
|
|
|
| HDD |
| |||
● When you connect a PC to the DV IN connector, we do not assure |
|
|
|
|
|
| 12bit | DVJVC |
| SOUND1 | |||
repeatedly until the desired sound |
| ||||||||||||
|
| the normal operation of this unit. |
|
|
|
|
| ||||||
|
| track appears on the TV screen. |
|
|
|
|
| ||||||
|
|
|
|
|
|
|
| ||||||
Your unit
DV IN connector
AUDIO 1: Select this to record the |
|
|
|
|
original stereo sound played |
|
|
|
|
back on the connected DV | DV | DV | 1 | 2 |
equipment. |
|
|
|
|
AUDIO 2: Select this to record the
dubbed stereo sound played back on the connected DV equipment.
MIX: Select this to record the sound of both “AUDIO 1” and “AUDIO 2”.
●Note that this selection is not available when the source programme is recorded in 16BIT (48 kHz) mode.
6 Press REC MODE repeatedly to set the recording mode.
Camcorder |
DV equipment |
DV cable
(not provided)
DV connector
7 Locate the point from where you want to start dubbing, then stop or pause playback by pressing the following buttons on the remote control: 4, 5, 3, 8, 9
●To play back in slow speed (1/10 of the normal speed), press 9 to pause playback, then press 3 or 5.
●To play back
●To change the playback direction, press 3 or 5.
8 Press w e to select 
, then press ENTER. The dubbing starts.
●Playback on the external DV equipment and recording on the unit should start simultaneously.
●To pause dubbing, press w e to select 
, then press ENTER. Both the unit and the external DV equipment pause dubbing. Pressing 9 on the unit also works the same way.
9 Press 8 on the remote control to stop dubbing.
●Both the unit and the external DV equipment stop dubbing.
NOTES:
●Dubbing copyright guarded programmes is not possible.
●Original DV informations such as the recording date and time are not recorded.
●The superimposed indication during the operation or dubbing is not recorded.
●If the dubbing is paused while the channel is set to “DV”, you cannot switch channels.
When you dub from DV equipment other than a camcorder
APerform step 1 to 3.
BLocate the point from where you want to start dubbing, then stop on the DV equipment.
● If you pause the DV equipment in this step, a few second’s still picture will be recorded at the beginning of the recorded programme.
C Set the input mode to “DV INPUT” on the DV equipment.
● If you select an input mode other than “DV INPUT”, unwanted pictures may be recorded at the beginning of the recorded programme.
D Perform step 8 to 9.
To skip unwanted part of the source picture
Press ENTER to stop both equipment, then press w e to select
.
Locate the point where you want to restart dubbing by pressing 4, 5, or 3, then press 8.
Press w e to select 
, then press ENTER to restart dubbing.