JVC LPT0923-001A manual When using your unit as the source player

Engage the Play mode of the source player. Engage the Record mode of the recording deck.

60 EN EDITING

	Edit To Or From Another Recorder	● Slide the TV/CABLE/SAT/DVD switch to DVD.
		1 Connect another recorder’s 21-pin SCART connector to the
You can use your unit as the source player or as the recording
		unit’s 21-pin SCART connector as illustrated.
deck.
		A When using your unit as the source player:

NOTE:			— connect its L-1 IN/OUT connector to the recording deck.
When using another recorder as the recording deck, refer to its			B When using your unit as the recording deck:
instruction manual.			— connect its L-2 IN/DECODER connector to the source
A When using your unit as the source player:			player.
			● If another recorder is compatible with the Y/C signal:
TV receiver	Player	Your unit	— when using your unit as the source player, set “L-1 OUTPUT” to
			“SCART S-VIDEO”. ( pg. 61)
			— when using your unit as the recording deck, set “L-2 SELECT” to
			“S-VIDEO”. ( pg. 61)
			2 When using this unit as the recording deck, press HDD or DVD
			to select the recording deck.
	21-pin SCART cable		3 When using this unit as the recording deck, press PR +/– to
	(provided)		select “L-2”.

● Set “L-2 SELECT” to “VIDEO” or “S-VIDEO”. ( pg. 61)

21-pin SCART cable (not provided)

Another recorder

4 When using this unit as the recording deck, press REC MODE repeatedly to set the recording mode.

5

6

7 Stop recording on the recording deck, then stop playback on the source player.

	Recorder		NOTES:
			● All necessary cables can be obtained from your dealer.
B When using your unit as the recording deck:			● For Y/C signal input/output, be sure to use a 21-pin SCART cable
			that is compatible with the Y/C signal.
			● When you use this unit as the source player for editing, be sure to set
TV receiver	Recorder	Your unit	“SUPERIMPOSE” to “OFF” before starting. ( pg. 69)
			● If you are using another recorder with S-Video and Audio output
			connectors, connect its S-Video and Audio output connectors to this
			unit’s S-VIDEO and AUDIO input connectors on the front panel.
			Then, set the unit’s input mode to “F-1” in step 3, and set “F-1 INPUT”
			to “S-VIDEO”. ( pg. 62)
	21-pin SCART cable
	(provided)
21-pin SCART cable
(not provided)

Another recorder

Player