JVC DR-MH30S, DR-MH20S manual Pause recording on HDD deck

40 EN BASIC OPERATIONS ON HDD DECK

	Basic Recording	Pause recording on HDD deck
		It is not possible to pause recording. Pressing 9 initiates Live
		Memory Playback.
		However, it is still possible to pause recording only when recording
● Turn on the unit.		the channels of external sources (“L-1”, “L-2”, “F-1”, and “DV”).
● Turn on the TV and select the AV mode.		Press and hold 7, then press 9 on the remote. To resume
● Slide the TV/CABLE/DBS/DVD switch to DVD.		recording, press and hold 7, then press 4 on the remote.
		No operation can be made with the buttons on the unit.
ATTENTION:		Recording Mode
The HDD on the unit requires approximately 20 seconds to start up
after the unit has been turned on, during which no operation can be		Select XP or SP for programs where quick movement occurs, such
made.		as sports programs, and LP or EP for talk shows, etc. with
		relatively less movement.

	HDD
8	7 HDD Lamp
CABLE/DBS
TV	DVD
HDD
0-9
CH+/-

		DR-MH30S	DR-MH20S
HDD capacity		160 GB	80 GB
Recording Time
XP	1 hour	Approx. 34 hours	Approx. 17 hours
SP	2 hours	Approx. 68 hours	Approx. 34 hours
LP	4 hours	Approx. 136 hours	Approx. 68 hours
EP	6 hours	Approx. 204 hours	Approx. 102 hours
FR480	8 hours	Approx. 272 hours	Approx. 136 hours

●For details on FR mode, refer to “Free Rate Function” ( pg. 39)

Recording Resume Function

If there is a power outage during recording, Instant Timer Recording (ITR) ( pg. 41) or timer recording ( pg. 46, 48), the recording will resume automatically when power is restored to the unit unless the unit’s memory backup has expired.

4

8

7

REC MODE

9

1 Press HDD so that the HDD lamp lights up on the unit.

2 Press CH +/– or the number keys to select the channel you wish to record.

3 Press REC MODE repeatedly to select the recording mode, then press ENTER.

●Each time you press REC MODE, the recording mode changes as follows:

XP ] SP ] LP ] EP ] FR60–FR360* ] FR420, FR480] (Back to the beginning)

*The value is selectable from 1 to 6 hours in 5-min. increment by pressing w e repeatedly after selecting “FR60–FR360”. To change the value in 30-min. increments, press and hold w e.

●For details on the recording mode, see the right column.

4 Press 7 on the unit to start recording. Or press and hold 7 and press 4 on the remote control.

5 Press 8 twice to stop recording.

●Pressing 8 once displays the confirmation message to stop recording. Press 8 again to terminate recording.

NOTES:

●Continuous recording for over 48 hours is not possible.

●It is not possible to record both on DVD and on HDD simultaneously.