JVC DR-MH20S, DR-MH30S manual Recording Features, Instant Timer Recording ITR

BASIC OPERATIONS ON HDD DECK EN 41

Recording Features

●Turn on the unit.

●Turn on the TV and select the AV mode.

●Slide the TV/CABLE/DBS/DVD switch to DVD.

●Press HDD so that the HDD lamp lights up on the unit.

HDD

Instant Timer Recording (ITR)

This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the unit off after recording is finished.

1 Press 7 on the unit to start recording.

2 Press 7 again to engage the ITR mode.

●On the front display panel, “0:30” appears.

3 If you want to record for more than 30 minutes, press 7 to extend the time. Each press extends recording time by 30 minutes.

NOTES:

●You can only perform ITR using the 7 button on the unit.

●When the recording capacity becomes full during timer recording or Instant Timer Recording, the unit is automatically shut off.

7 HDD Lamp

CABLE/DBS

TV	DVD
TV AV/ VIDEO
HDD

CH+/-

Watch Another Program While Recording On The Unit

While recording is going on, you can watch another program on the TV by using the TV’s tuner.

NOTE:

It is required that the remote control is set to be able to operate the TV in advance. ( pg. 64)

1Slide the TV/CABLE/DBS/DVD switch to TV.

2Press CH +/– repeatedly to select the desired channel.

DISPLAY

Elapsed Recording Time And Disc Remaining Time Indication

During recording, press DISPLAY repeatedly until the desired indication appears on the front display panel.

●Each time you press DISPLAY, the time indication changes as follows:

Elapsed recording time ] Disc remaining time ] Clock ] (Back to the beginning)

Second Audio Recording

This unit’s built-in MTS decoder enables reception of Multichannel TV Sound broadcast. To record a SAP program received, set “2ND AUDIO RECORD” to “ON”. ( pg. 68)

NOTE:

When the channel is changed on the unit;

●The “MONO” indicator appears on the screen for about 5 seconds if the program is a monaural broadcast.

●The “STEREO” indicator appears on the screen for about 5 seconds if the program is a stereo broadcast.

●Both “STEREO” and “SAP” indicators appear when a stereo program is accompanied by SAP sound.

●Both “MONO” and “SAP” indicators appear when the main audio on the monaural broadcast is accompanied by SAP sound.