TROUBLESHOOTING EN 75
Recording (DVD Deck)
The desired program cannot be recorded.
●The channel position does not correspond to that in the receiving area.
]Set the correct channel position for the receiving broadcast. ( pg. 23)
Recording cannot be made.
●No disc or a disc not being compatible with the unit is loaded. ]Load a recordable disc on the unit. ( pg. 7)
●The disc loaded is not formatted.
]Format the disc. ( pg. 71)
●A finalized
]Recording cannot be made on finalized discs. Load a recordable disc on the unit.
●The disc is full or does not have enough space for the title to be recorded.
]Clear unnecessary titles on the disc or load a blank disc. ( pg. 53)
●The
protect position.
]Release the protect tab. ( pg. 10)
Recording (HDD Deck)
TV broadcasts cannot be recorded.
●
Camcorder recording is not possible.
●The camcorder has not been properly connected. ]Confirm that the camcorder is properly connected.
●The input mode is not correct.
]Set the input mode to
Timer Recording
Timer programing cannot be made.
●Date and time is not correct.
]Set date and time correctly. ( pg. 22)
●Timer recording is in progress.
]Timer programing can’t be performed while a timer recording is in progress. Wait until it finishes.
Timer programing recording does not start.
●Date and time is not correct.
]Set date and time correctly. ( pg. 22)
VCR Plus+ Timer Programing cannot be made.
●Date and time set on the unit is not correct. ]Set date and time correctly. ( pg. 22)
●The channel position does not correspond to that in the receiving area.
]Set the correct channel position for the receiving broadcast. ( pg. 23)
The VCR Plus+ system does not
●The unit’s channel positions have been set incorrectly. ]Refer to “Changing VCR Plus+® Setting” ( pg. 70) and
reperform the procedure.
Automatic Satellite Program Recording does not start.
●The DBS receiver is not connected properly to this unit.
]Connect the DBS receiver to the AUDIO/VIDEO INPUT
On the front display panel, “–
●Power failure occurred.
]Set date and time correctly. ( pg. 22)
“PROGRAM FULL” appears on the TV screen during timer programing.
●32 programs have already been timer programed.
]Clear unnecessary programs on the unit, then try timer programing again. ( pg. 49)
The disc space does not increase when recorded titles are cleared.
●The PC’s data recorded on a
]Format the disc. (When the disc is soiled, wipe the disc with a soft dry cloth before formatting.) ( pg. 11, 71)