JVC DR-MH30S, DR-MH20S manual Cable Box and DBS Receiver Users

46 EN TIMER RECORDING

7 The PlusCode number you entered and the matching timer-

VCR Plus+® Timer Programingrecording information are displayed on the TV screen. Check the program data.

You can program this unit to timer-record as many as 32 programs.	● To cancel this setting, press RETURN.
With the VCR Plus+ system, timer programing is greatly simplified
because each TV program has a corresponding code number	IMPORTANT:
which your unit is able to recognize.	Make sure the channel position number you wish to record is
You can use the remote control to enter the PlusCode number.	displayed; if not, see “Changing VCR Plus+® Setting” ( pg. 70) and
	set the Guide Channel number correctly.

●Make sure that the unit’s built-in clock is set properly.

● Turn on the unit.		8 Press rt to select the desired recording option as required.
● Turn on the TV and select the AV mode.		Press rt to select the desired setting, then press ENTER.
● Slide the TV/CABLE/DBS/DVD switch to DVD.		● “INPUT TITLE” ( pg. 52, “Modify Title Name”)
		● “CATEGORY” ( pg. 53, “Modify Category”)
CABLE/DBS		● “WEEKLY/DAILY” ( pg. 47, “Weekly/Daily Recording”)
TV	DVD	● “REC MODE” ( pg. 37, “Recording Mode”)
		9 Press rt to select “OK”, then press ENTER to access the
		Program Confirmation screen.
0 – 9		10 Press w e to select “EXIT”, then press ENTER to complete
		timer programing.
		● To program another timer, press w e to select “CONTINUE”, then
CANCEL		press ENTER.
PROGRAM		● If “PROGRAM OVERLAPPED” appears on the TV screen, see
		page 49.
ENTER		NOTES:
RETURN		● There may be cases that the VCR Plus+ Timer Programing function
		prolongs the stop time of the programing.
		● When two successive programs are recorded on a DVD-RW disc with
		the VCR Plus+ Timer Programing function, the beginning of the
CLEAR		second one may be left off the recording.
		● If the copy limited program is received during timer-recording, the unit
		enters Record Pause mode. Recording starts again if it is switched to
DISPLAY		a recordable broadcast during the time you programed.
VPS/PDC#		IMPORTANT:

							If you have moved to a different area or if a broadcasting station’s
							channel number has been changed, the wrong channel number will
							be displayed on the VCR Plus+ program screen in step 7. When this
1 Load a recordable disc if recording to DVD.							happens, set the correct Guide Channel number for that station.
							( pg. 70, “Changing VCR Plus+® Setting”)
2 Press PROGRAM to access the program top screen.
3 Press rtw e to select “VCR PLUS+”, then press ENTER.							Cable Box and DBS Receiver Users
● When “PROGRAM FULL DELETE UNWANTED TIMER							To timer-record a satellite broadcast using the VCR Plus+
PROGRAMS” appears on the TV screen, you need to cancel some of							system:
the reserved programs. ( pg. 49)							A Perform “Cable Box and/or DBS Receiver Control Setting”
4 Press the number keys to							( pg. 24).
				123 PROGRAM > VCR PLUS+ (1/2)			B Perform “VCR Plus+® Timer Programing” ( pg. 46).
enter the VCR Plus+ number of a				PLUS CODE NO.			C Leave the cable box or DBS receiver’s power on.
program you wish to record.
				1 2 3 4
OR	SELECT WITH [		]	1	2	3
	THEN PRESS [ENTER]			4	5	6
Press rtw e to select the
	TO EXIT			7	8	9
	PRESS [PROGRAM]
desired number key on the				DELETE	0	DELETE ALL
screen, then press ENTER.	PROGRAM	ENTER		RECORD TO		DVD
Repeat to enter all needed	EXIT	SELECT				CONFIRM
numbers.

5 Press rt to select “RECORD TO”, then press ENTER. Press rt to select the desired recording deck, then press ENTER.

6Press rtw e to select “CONFIRM”, then press ENTER.

● If the number you entered is invalid, “PLUSCODE NO. ERROR CONFIRM PLUSCODE NO. THEN RETRY” appears on the TV screen. Input a valid PlusCode number.

● If “GUIDE PROGRAM IS NOT SET SET GUIDE PROGRAM THEN RETRY” appears on the TV screen, set Guide Channel Numbers manually. ( pg. 70)