JVC DR-MH20S, DR-MH30S manual Example Dubbing to an MD

				EDITING EN 63
	Digital Audio Dubbing			1 Connect the unit and a digital audio device using either an
				optional optical cable or an optional coaxial cable.
				2 Place a disc on the unit and load an MD on the connected digital
You can dub selected audio from a DVD or Audio CD disc to a
				audio device.
digital audio device.
				3 Select the audio to be dubbed.
However, it is not possible to dub copy-protected discs.
				4 Start playback slightly before the actual point from where you
● Turn on the TV and select the AV mode.				wish to start dubbing.
● Slide the TV/CABLE/DBS/DVD switch to DVD.				5 Press 9 to pause playback.
Example: Dubbing to an MD				6 Select the input mode on the connected digital audio device.
		Recorder		7 Press 4 to start playback on the unit.
				8 Start recording on the digital audio device.
				9 Stop recording on the digital audio device. Then press 8 to stop
				playback on the unit.
				NOTE:
				There may be a discrepancy of several seconds between where you
				intend editing to start, and where it actually starts.
			Digital audio device
			(MD deck, etc.)
		Optical cable	Coaxial cable
		(not provided)	(not provided)

DIGITAL OUT (OPTICAL)

Player

IN	Y	S-VIDEO	L-1	L-2		S-VIDEO L-1	L-2
	PB	L-1		VIDEO	L-1		VIDEO
				LEFT			LEFT
OUT	PR	L-2		AUDIO	L-2		AV COMPU LINK
							AUDIO
				RIGHT			RIGHT
ANTENNA	COMPONENT		OUTPUT			INPUT	CABLE BOX

1

PCM STREAM

DIGITAL OUT

OPTICAL COAXIAL

Rear of unit

DIGITAL OUT (COAXIAL)

Note for connection:

Remove the protection cap from the optical cable.