JVC DR-MH30S, DR-MH20S manual Simulated Surround Effect, Time Search, Adjusting The Picture Quality

34 EN BASIC OPERATIONS ON DVD DECK

CABLE/DBS		Simulated Surround Effect
TV	DVD
0-9		It is possible to get a simulated surround effect from your stereo
		system. You can enjoy the virtual surround sound with your
		2-channel stereo system.
CANCEL		1 Press ON SCREEN twice to access the on-screen bar.
		2 Press w e to select “	”, then press ENTER.

ENTER		● Above the selected item, “3D-ON” appears and Simulated Surround
		Effect is activated.
	rtwe
		● Each time you press ENTER, “3D-ON” appears and disappears
		alternately.

2 6

4

CLEAR

ON SCREEN

Time Search

You can play back a disc from the desired point by specifying the elapsed playing time from the beginning of a program (DVD-RAM, DVD-R, DVD-RW, DVD VIDEO and HDD) or a disc (Video CD/ SVCD and Audio CD).

1 Press ON SCREEN twice to access the on-screen bar.

2 Press w e to select “”, then press ENTER. The pop-up window appears under the selected item.

TITLE 99 TRACK 99 EACH 0:00

TITLE 99	TRACK 99	EACH 0:00
DVD-			3D-ON	CINEMA AUTO 1

VIDEO

To clear the on-screen bar

Press ON SCREEN.

To cancel the simulated surround effect

Press ENTER to clear “3D-ON” from the screen.

NOTES:

●Simulated Surround Effect works correctly only when playing back a title recorded in multichannels.

●Simulated Surround Effect does not affect the DVD VIDEO bitstream signal from the DIGITAL OUT connectors.

●When Simulated Surround Effect is activated, the settings of

“ANALOG AUDIO OUT” and “D. RANGE CONTROL” are disabled. ( pg. 67)

Adjusting The Picture Quality

You can obtain optimal picture quality by selecting an appropriate picture mode.

1 Press ON SCREEN twice to access the on-screen bar.

DVD-

VIDEO

CINEMA AUTO 1

2Press w e to select “”, then press ENTER. The pop-up window appears under the selected item.

3 Press the number keys to enter the time, then press ENTER. Playback starts from the specified time.

TITLE 99 TRACK 99 EACH 0:00

Example:

To play back from a point 12 (minutes): 50 (seconds) elapsed.

DVD-

VIDEO

CINEMA AUTO 1

3 Press rt to select the desired option, then press ENTER.

Press 1	Press 2
Press 5	Press 0

NORMAL: Normally select this option.

CINEMA: Suitable for a movie disc, etc.

SHARP: Clearer, sharper-edged picture when viewing images with lots of flat, same-colored surfaces such as cartoons.

SOFT: Select this option when too much noise appears.

To clear the on-screen bar

Press ON SCREEN.

If you have specified a wrong selection,

Press CANCEL (&) (for the last entered number) or CLEAR (8) (for whole numbers) to clear the wrong number, then enter the correct one(s) before you press ENTER in this step.

To clear the on-screen bar

Press ON SCREEN.

NOTES:

●When “X” is displayed on the TV screen in step 3, you have selected a point that excesses the recording time of the disc.

●Some DVD VIDEO discs do not contain time information, and it is not possible to use the Time Search function. In such cases, “X” is displayed on the TV screen as well.

●This function is not possible for a Video CD/SVCD with PBC function.