JVC DR-MH30S, DR-MH20S Slide the TV/CABLE/DBS/DVD switch to DVD, To select the recording deck

62 EN EDITING

	Edit To Or From Another Recorder	Slide the TV/CABLE/DBS/DVD switch to DVD.
		1 Make connections.
You can use your unit as the source player or as the recording
		A If another recorder has no S-VIDEO connector, connect the
deck.
		unit’s AUDIO/VIDEO INPUT connectors to the audio/video output

NOTE:	connectors on another recorder.
When using another recorder as the recording deck, refer to its	B If another recorder has S-VIDEO connector, connect the
instruction manual.	AUDIO INPUT and S-VIDEO INPUT connectors to the audio and
Your unit	S-video output connectors on another recorder.
	● If connecting a unit with an S-VIDEO connector, it is recommended to
	use an optional S-Video cable to minimize picture degradation while
1	editing.
L-2
Recorder	2 When using this unit as the recording deck, press HDD or DVD
	to select the recording deck.
TV receiver	3 Press CH +/– to select “L-1” or “L-2” depending on the
	connectors being used.
	● Set “REAR AUX L-1” or “REAR AUX L-2” to “VIDEO” for the VIDEO
	input connector, or “S-VIDEO” for the S-VIDEO input connector,
	depending on the connector being used. ( pg. 68)
	4 When using this unit as the recording deck, press REC MODE
	repeatedly to set the recording mode.
	5 Engage the Play mode of the source player.
	6 Engage the Record mode of the recording deck.
	7 Stop recording on the recording deck, then stop playback on the
	source player.
Another recorder	NOTES:
	● All necessary cables can be obtained from your dealer.
Player	● When you use this unit as the source player for editing, be sure to set
	“SUPERIMPOSE” to “OFF” before starting. ( pg. 69)