JVC DR-MH30S, DR-MH20S manual Setting, Guide Channel Number

70 EN SUBSIDIARY SETTINGS
Changing VCR Plus+	®	Setting	Guide Channel Number Set
			1 Press SET UP to access the Main Menu screen.
The VCR Plus+ programing system assigns a VCR Plus+ guide
			2 Press w e to select “INITIAL SET UP”, then press t.
channel to the TV channels and the cable channels. These guide
			3 Press w e to select “TUNER
channel numbers are also called the VCR Plus+ channel codes.				DVD VIDEO SET UP HDD/DVD SET UP			FUNCTION SET UP	INITIAL SET UP
Most TV listings have a section, usually a chart, indicating the			SET”, then press t.	TUNER SET UP		STB SET UP	CLOCK SET UP
guide channel numbers assigned to each station.			4 Press rt w e to select “GUIDE		AUTO CH SET		MANUAL CH SET
To ensure that VCR Plus+ timer recording operates correctly, it is			CH SET”, then press ENTER.
necessary to set the “VCR Plus+ Guide Channel” for each station.						GUIDE CH SET
If you have moved to a different area or if a broadcasting station’s						11 12 13
channel number has been changed, perform the following steps to				SET UP	ENTER	SELECT WITH [ ] THEN PRESS [ENTER]
set the correct guide channel number.
				EXIT	SELECT	PRESS [SET UP] TO EXIT

NOTES:			5 Press rt to select “GUIDE CH”,
				1112
			then press ENTER.	13 INITIAL SET UP > GUIDE CH SET
● In many instances, the VCR Plus+ guide channel numbers for cable
			6 Press rt to select the Guide		GUIDE CH		1
and broadcast TV stations DO NOT match the channel number on					CABLE CH		- -
which it is received by your unit or cable box. Check your TV listing,			Channel number for the desired
or contact your cable supplier for details.			station as shown in the TV listings.
● Many TV stations can be viewed on cable. Check your TV listing, or			Then press ENTER.
							RETURN
contact your cable supplier for details.			● To change the Guide Channel
				SET UP		ENTER SELECT WITH [	] THEN PRESS [ENTER]
			number in 10 increments, press and	EXIT		PRESS [SET UP] TO EXIT
● Turn on the unit.						SELECT
			hold rt.
● Turn on the TV and select the AV mode.			● If you receive your channels with a cable box and if you have properly
● Slide the TV/CABLE/DBS/DVD switch to DVD.			set your Controller, “CABLE CH” appears in place of “HDD/DVD CH”.
			If not, perform “Cable Box and/or DBS Receiver Control Setting”
	CABLE/DBS		( pg. 24).
	TV	DVD	7 Press rt to select “HDD/DVD CH”, then press ENTER. Press

rt to select the number of the unit’s channel position on which the Guide Channel Number’s broadcast is received by the unit or the DBS receiver. Then press ENTER.

● To timer-record a satellite program with the VCR Plus+ system, you need to install the provided Satellite Controller and perform the procedure described in “Cable Box and/or DBS Receiver Control Setting” ( pg. 24).

● Repeat steps 5 – 7 as necessary.

ENTER

rtwe

8 Press SET UP to complete the setting.

Guide Channel Number

“Guide Channel (GUIDE CH) Number” refers to the assigned TV station numbers, according to broadcast area, for the VCR Plus+ timer recording. The Guide Channel Numbers can be found in most TV listings.

SET UP