3M X55, X45, S55 manual Connecting power supply

Page 14

Setting up

Connecting power supply

WARNING ►Please use extra caution when connecting the power cord as incorrect or faulty connections may result in fire and/or electrical shock.

•Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one.

•Only plug the power cord into an outlet rated for use with the power cord's specified voltage range.

•Never modify the power cord. Never attempt to defeat the ground connection of the three-pronged plug.

1.

2.

AC inlet

Connector of the power cord

Connect the connector of the power cord to the AC inlet of the projector.

Firmly plug the power cord's plug into the outlet.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Trademark acknowledgment About this manualThank you for purchasing this projector Contents About contents of package CB/PB CR/PR Part namesProjector Remote control Control buttonsSetting up At 169 screen ArrangementAt 43 screen Adjusting the projectors elevator Bottom of the projector Lever Base Front About the filter cover for bottom-up use Connecting your devices About Plug-and-Play capabilityExamples of connection with a computer Connecting to a monitor outputConnecting to a speaker with amplifier output CB/PB Examples of connection with a VCR/DVD playerCR/PR Connecting power supply Remote control Putting batteriesUsing the remote control Turning off the power Power on/offTurning on the power Operating Adjusting the volumeSelecting an input signal Temporarily muting the sound At a RGB signal Normal  43  Searching an input signalAdjusting the zoom and focus  At a video signal /no signal 43  169  Small At a RGB signal Using the automatic adjustment featureAdjusting the position  At a video signalTemporarily blanking the screen Using the magnify featureFreezing the screen USB mouse and keyboard control Available function Remote control operationOperating the computer screen Easy Menu Multifunctional settingsUsing the menu function Easy Menu Easy Menu Picture Menu GammaColor Temp Picture MenuHigh  Middle  LOW  Custom SecamLOAD1  LOAD2  LOAD3  LOAD4 TV  Film  Turn OFFProgressive SAVE4 SAVE3  SAVE2  SAVE1Over Scan PhaseImage Menu PositionImage Menu Auto AdjustAt a video signal SizeVideo Format Input MenuComponent Frame LockInput Menu InformationNormal  Whisper Setup MenuVolume Normal  Hinvert  Vinvert  H&VINVERTOSD Bright Screen MenuMenu Position BlankMy Screen Screen MenuStart UP My Screen LockSync is OUT of Range MessageNo Input is Detected Search Reset  CancelOption Menu Auto OFFOption Menu ServiceFactory Reset FAN SpeedMaintenance LampCase of replacement by yourself LampAir filter Air filter. And then slowly turn the projector bottom upPage Related messages Related messages Message DescriptionRegarding the indicator lamps Regarding the indicator lamps These has not been properly fixed Electrical power cord is not pluggedPower switch is not set to the on position Phenomenon Cases not involving a machine defect ReferencePhenomena that may easily be mistaken for machine defects RGB output SpecificationRGB input Video input Communication portSpecifications Not included with Basic Packet Part Number Accessories Part NumberHow to Order DN00741 S55/X45/X55OGENG
Related manuals
Manual 96 pages 36.66 Kb
Top Page Image Contents