3M X55, X45, S55 manual Picture Menu, Gamma

Multifunctional settings

PICTURE Menu

With the PICTURE menu, items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table.

MENU [RGB]		:SELECT
PICTURE	BRIGHT	+0
IMAGE	CONTRAST	+0
INPUT	GAMMA	#1 DEFAULT
SETUP	COLOR TEMP	LOW
SCREEN	COLOR	+0
OPTION	TINT	+0
EASY MENU	SHARPNESS	+0
	PROGRESSIVE	TURN OFF
	MY MEMORY	SAVE 1

Item	Description
BRIGHT	Using the buttons ▲/▼ adjusts the brightness. :		Light  Dark
CONTRAST	Using the buttons ▲/▼ adjusts the contrast. :	Strong  Weak
	Using the buttons ▲/▼ switches the GAMMA mode. :
	#1 DEFAULT  #1 CUSTOM  #2 DEFAULT
	#3 CUSTOM  #3 DEFAULT  #2 CUSTOM
	To adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOM
	Selecting a mode of CUSTOM and then				ENTER :
	pressing the button ► or the ENTER button	1 2 3 4 5 6 7				8
	displays a dialog to aid you in adjusting the
	mode.
	This function is useful when you want to
	change the brightness of particular tones.	+0 +0 +0 +0 +0 +0 +0				+0
GAMMA	Choose an item using the buttons ◄/►, and			GAMMA [CUSTOM 1]
	adjust the level using the buttons ▲/▼.
	You can display a test pattern for checking the effect of your
	adjustment by pressing the ENTER button.
	Each time you press the ENTER button, the pattern changes as
	below.
	No pattern  Gray scale of 9 steps
	Ramp  Gray scale of 15 steps
	Eight of equalizing bars corresponds to eight of tone level of test
	pattern except the darkest in the left end. If you want to adjust
	the 2nd tone from left end on the test pattern, use the equalizing
	adjustment bar “1”. The darkest tone at the left end of the test
	pattern cannot be controlled with any of equalizing adjustment bar.

26