3M X45, S55, X55 manual Easy Menu

Multifunctional settings

EASY Menu

With the EASY MENU, items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control. Then perform it referring to the following table.

EASY MENU

ASPECT	4:3
KEYSTONE	+0
MODE	NORMAL
BRIGHT	+0
CONTRAST	+0
COLOR	+0
TINT	+0
SHRPNESS	+3
WHISPER	NORMAL
MIRROR	NORMAL
RESET
FILTER TIME	0
LANGUAGE	ENGLISH

Go To Advance Menu...

Item	Description
ASPECT	Using the buttons ◄/► switches the mode for aspect ratio.
	See the item ASPECT of section IMAGE menu (29).
KEYSTONE	Using the buttons ◄/► corrects the keystone distortion.
	See the item KEYSTONE of section SETUP menu (33).
	Using the buttons ◄/► switches the mode of picture type.The
	modes of picture type are combinations of a mode of GAMMA and
	a mode of COLOR TEMP. Choose a suitable mode according to the
	projected source.
	NORMAL  CINEMA  DYNAMIC
MODE	NORMAL: (COLOR TEMP = MIDDLE) + (GAMMA = #1 DEFAULT)
	CINEMA: (COLOR TEMP = LOW) + (GAMMA = #2 DEFAULT)
	DYNAMIC: (COLOR TEMP = HIGH) + (GAMMA = #3 DEFAULT)
	• When the combination of GAMMA and COLOR TEMP differs
	from pre-assigned modes above, the display on the menu for the
	MODE is “CUSTOM”. Please refer to the items GAMMA (26) and
	COLOR TEMP (27) of PICTURE menu.
BRIGHT	Using the buttons ◄/► adjusts the brightness.
	See the item BRIGHT of section PICTURE menu (26).
CONTRAST	Using the buttons ◄/► adjusts the contrast.
	See the item CONTRAST of section PICTURE menu (26).
COLOR	Using the buttons ◄/► adjusts the strength of whole color.
	See the item COLOR of section PICTURE menu (27).
TINT	Using the buttons ◄/► adjusts the tint.
	See the item TINT of section PICTURE menu (27).

24