3M X55, X45, S55 manual Air filter. And then slowly turn the projector bottom up

Page 41
Turn the projector on, and reset the filter time using the FILTER TIME function of OPTION menu (38).
Position the cleaned air filter or a new air filter into place, and push the points of "PUSH" word with claws to fix the air filter.

Maintenance

Air filter

WARNING ►Before caring, make sure the power switch is off and the power cable is not plugged in, then allow the projector to cool sufficiently. The care in a high temperature state of the projector could cause a burn and/or malfunction to the projector.

►Use only the air filter of the specified type. Do not use the projector with the air filter and filter cover removed.

►Avoid wetting the projector or inserting liquids in the projector. It could result in a fire, an electric shock, and and/or malfunction to the projector.

CAUTION ►Please replace the air filter when it is damaged or too soiled, and also when you replace the lamp.

When the indicators or a message prompts you to clean the air filter, clean the air filter as soon as possible. If the air filter becomes clogged by dust or the like, internal temperatures rise and the power may be automatically turned off for malfunction prevention.

1. Turn the projector off, and unplug the power cord. Allow the projector to cool for at least 45 minutes. And

prepare a vacuum cleaner.

2. After making sure that the projector is cool adequately, slowly turn the projector so that the lens-side is facing up. Please be careful for a projector not to fall. While the

projector is placed lens-side up, hold the projector.

3. Unhook the claw of the filter cover using a minus screwdriver or similar, and remove the filter cover.

4. Holding the air filter’s knob, pull the air filter off.

5. Apply a vacuum cleaner to the vent of the projector for the

air filter. And then slowly turn the projector bottom up.

6. Apply a vacuum cleaner to the air filter and filter cover. Please replace the air filter when it is damaged or too soiled.

To prepare a new air filter, contact your dealer and tell the air filter type number = 78-8118-9376-3.

Filter cover

Filter cover’s claw Air filter’s knob

Air filter

An air filter of specified type will come even with the replacement lamp for this projector.

7.

8. Replace the filter cover and snap it back into place.

9. Slowly turn the projector so that the top is facing up.

10.

NOTE • Incorrectly resetting of the filter timer (resetting without replacement, or neglect of resetting after replacement) will result in incorrect message functions.

41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Trademark acknowledgment About this manualThank you for purchasing this projector Contents About contents of package CB/PB CR/PR Part namesProjector Control buttons Remote controlSetting up At 169 screen ArrangementAt 43 screen Adjusting the projectors elevator Bottom of the projector Lever Base Front About the filter cover for bottom-up use About Plug-and-Play capability Connecting your devicesExamples of connection with a computer Connecting to a monitor outputConnecting to a speaker with amplifier output CB/PB Examples of connection with a VCR/DVD playerCR/PR Connecting power supply Putting batteries Remote controlUsing the remote control Turning off the power Power on/offTurning on the power Selecting an input signal Adjusting the volumeOperating Temporarily muting the soundAdjusting the zoom and focus Searching an input signal At a RGB signal Normal  43   At a video signal /no signal 43  169  SmallAdjusting the position Using the automatic adjustment feature At a RGB signal  At a video signalTemporarily blanking the screen Using the magnify featureFreezing the screen USB mouse and keyboard control Available function Remote control operationOperating the computer screen Easy Menu Multifunctional settingsUsing the menu function Easy Menu Easy Menu Gamma Picture MenuHigh  Middle  LOW  Custom Picture MenuColor Temp SecamProgressive TV  Film  Turn OFFLOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1Image Menu PhaseOver Scan PositionAt a video signal Auto AdjustImage Menu SizeComponent Input MenuVideo Format Frame LockInformation Input MenuVolume Setup MenuNormal  Whisper Normal  Hinvert  Vinvert  H&VINVERTMenu Position Screen MenuOSD Bright BlankStart UP Screen MenuMy Screen My Screen LockSync is OUT of Range MessageNo Input is Detected Option Menu Reset  CancelSearch Auto OFFFactory Reset ServiceOption Menu FAN SpeedLamp MaintenanceLamp Case of replacement by yourselfAir filter. And then slowly turn the projector bottom up Air filterPage Related messages Message Description Related messagesRegarding the indicator lamps Regarding the indicator lamps Power switch is not set to the on position Electrical power cord is not pluggedThese has not been properly fixed Phenomenon Cases not involving a machine defect ReferencePhenomena that may easily be mistaken for machine defects RGB input Video input SpecificationRGB output Communication portSpecifications Not included with Basic Packet Part Number Accessories Part NumberHow to Order DN00741 S55/X45/X55OGENG
Related manuals
Manual 96 pages 36.66 Kb
Top Page Image Contents