3M X45, S55, X55 manual Bottom of the projector Lever Base Front

Page 9

Setting up

Adjusting the projector's elevator

CAUTION ►Be careful not to pinch your ﬁnger on the occasion of the handling of a base.

►Do not hold the base, lens or other project part to move the projector. ►Do not use the base to suspend the projector.

►Do not push or put anything on the both sides of the top of the projector.

Bottom of the projector

Lever

Base

Front

1. Turn off the projector, and unplug the power cord. Allow the lamp bulb to cool for at least 45minutes.

2. After make sure that the projector has cooled adequately, slowly ﬂip over the projector, so that the bottom is facing up.

3. Put the base on the bottom of the projector as shown in the ﬁgure. Then slide it to the front of the projector until it locks into position. To remove it, slide the

base to the back of the projector pinching the lever of the base. 4. Slowly turn the projector so that the top is facing up.

9

Image 9

Contents About this manual Thank you for purchasing this projectorTrademark acknowledgment Contents About contents of package Part names ProjectorCB/PB CR/PR Control buttons Remote controlSetting up Arrangement At 43 screenAt 169 screen Adjusting the projectors elevator Bottom of the projector Lever Base Front About the ﬁlter cover for bottom-up use About Plug-and-Play capability Connecting your devicesConnecting to a monitor output Connecting to a speaker with ampliﬁer outputExamples of connection with a computer Examples of connection with a VCR/DVD player CR/PRCB/PB Connecting power supply Putting batteries Remote controlUsing the remote control Power on/off Turning on the powerTurning off the power Selecting an input signal Adjusting the volumeOperating Temporarily muting the soundAdjusting the zoom and focus Searching an input signal At a RGB signal Normal  43   At a video signal /no signal 43  169  SmallAdjusting the position Using the automatic adjustment feature At a RGB signal  At a video signalUsing the magnify feature Freezing the screenTemporarily blanking the screen Available function Remote control operation Operating the computer screenUSB mouse and keyboard control Multifunctional settings Using the menu functionEasy Menu Easy Menu Easy Menu Gamma Picture MenuHigh  Middle  LOW  Custom Picture MenuColor Temp SecamProgressive TV  Film  Turn OFFLOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1Image Menu PhaseOver Scan PositionAt a video signal Auto AdjustImage Menu SizeComponent Input MenuVideo Format Frame LockInformation Input MenuVolume Setup MenuNormal  Whisper Normal  Hinvert  Vinvert  H&VINVERTMenu Position Screen MenuOSD Bright BlankStart UP Screen MenuMy Screen My Screen LockMessage No Input is DetectedSync is OUT of Range Option Menu Reset  CancelSearch Auto OFFFactory Reset ServiceOption Menu FAN SpeedLamp MaintenanceLamp Case of replacement by yourselfAir ﬁlter. And then slowly turn the projector bottom up Air ﬁlterPage Related messages Message Description Related messagesRegarding the indicator lamps Regarding the indicator lamps Power switch is not set to the on position Electrical power cord is not pluggedThese has not been properly ﬁxed Phenomenon Cases not involving a machine defect ReferencePhenomena that may easily be mistaken for machine defects RGB input Video input SpeciﬁcationRGB output Communication portSpeciﬁcations Accessories Part Number How to OrderNot included with Basic Packet Part Number DN00741 S55/X45/X55OGENG

Related manuals

Manual 96 pages 36.66 Kb