3M X45, S55, X55 manual Setup Menu, Normal  Whisper, Normal  Hinvert  Vinvert  H&VINVERT, Volume

Multifunctional settings

SETUP Menu

With the SETUP menu, items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table.

MENU [RGB]		:SELECT
PICTURE	KEYSTONE	+0
IMAGE	WHISPER	NORMAL
INPUT	MIRROR	NORMAL
SETUP	VOLUME	16
SCREEN
OPTION
EASY MENU

Item

Description

	Using the buttons ▲/▼ corrects the keystone distortion.
	Upper in the data  Lower in the data
	• The adjustable range of this function will vary with the type of input
	signal. At some signals, this function may not work well.
KEYSTONE	• When the V:INVERT or the H&V:INVERT is selected under the
	item MIRROR, if the projector screen is inclined or if the projector is
	angled downward, this function may not work correctly.
	• When the zoom adjustment is set to the TELE side, this correction
	may be excessive. This function should be used with zoom set to
	WIDE whenever possible.
	Using the buttons ▲/▼ turns off/on the whisper mode.
WHISPER	NORMAL  WHISPER
	• When the WHISPER is selected, acoustic noise and screen
	brightness are reduced.
	Using the buttons ▲/▼ switches the mode for mirror status.
MIRROR
	NORMAL  H:INVERT  V:INVERT  H&V:INVERT
VOLUME	Using the buttons ▲/▼ adjusts the volume.
	High  Low

33