LG Electronics PCM-MS2 installation manual Positioning the mounting brackets

Page 11

Positioning the mounting brackets

Nylon spacers if

Applicable

(see chart) on page 4 and 5

Center mark

Inverted flat panel

Lay the left and right mounting brackets (stamped arrows facing out). See figure 4.

CAUTION: Check the chart on page 4 and 5 to see if your flat panel needs nylon spacers. The nylon spacers provided, must be used. Failure to do so will result in damaging the flat panel.

Install the nylon spacers to the mounting points on the flat panel see figure 3.

NOTE: See chart (if the nylon spacers apply to your flat panel).

Mounting brackets

Bottom of flat

panel

Arrows facing out

- 11 -

Image 11

Contents Universal flat-panel mount Contents Description Assembly drawingElectrograph Ikegami Flat panel listRCA Parts list Parts list con’t Checking the thread depth on your flat panel Parts list con’t Finding center of the flat panel display Positioning the mounting brackets Align Mounting brackets Securing the mounting brackets Finding the wood studs behind the wall structure Mounting slot positions Look at the assembly drawing onMarking the bottom plate mounting points Securing the bottom wall plate Drill four 4 ¼ pilot holes to the marked wall. See figure Securing the top plateTightness and Security Bottom Securing the flat panel to the wall mountLateral shift Lateral shift adjustment North America