LG Electronics PCM-MS2 installation manual Lateral shift

Page 20

Make any lateral shift adjustment and lock it by tightening the two (2) M6 x 30 (mm) Phillips screws found on the bottom of the mounting brackets.

CAUTION: Do not over tighten the M6 screws to the rods.

See figure 18

Lateral shift

M6 x 30 Lateral

shift screw

- 20 -

Image 20

Contents Universal flat-panel mount Contents Assembly drawing DescriptionFlat panel list Electrograph IkegamiRCA Parts list Parts list con’t Checking the thread depth on your flat panel Parts list con’t Finding center of the flat panel display Positioning the mounting brackets Align Mounting brackets Securing the mounting brackets Mounting slot positions Look at the assembly drawing on Finding the wood studs behind the wall structureMarking the bottom plate mounting points Securing the bottom wall plate Securing the top plate Drill four 4 ¼ pilot holes to the marked wall. See figureTightness and Security Securing the flat panel to the wall mount BottomLateral shift Lateral shift adjustment North America