LG Electronics PCM-MS2 installation manual Tightness and Security

Page 18

Level and secure the plate to the wall with the reference arrow facing up to the ceiling. Secure the plate using the four (4) 5/16" lag bolts and flat washers (supplied). See figure 16

CAUTION: Do not over tighten the lag bolts.

NOTE: CHECK THE MOUNT FOR PROPER

TIGHTNESS AND SECURITY.

Power source area

Wall plates

- 18 -

Image 18

Contents Universal flat-panel mount Contents Assembly drawing DescriptionFlat panel list Electrograph IkegamiRCA Parts list Parts list con’t Checking the thread depth on your flat panel Parts list con’t Finding center of the flat panel display Positioning the mounting brackets Align Mounting brackets Securing the mounting brackets Mounting slot positions Look at the assembly drawing on Finding the wood studs behind the wall structureMarking the bottom plate mounting points Securing the bottom wall plate Securing the top plate Drill four 4 ¼ pilot holes to the marked wall. See figureTightness and Security Securing the flat panel to the wall mount BottomLateral shift Lateral shift adjustment North America