Securing the bottom wall plate
Level
Level and secure the plate to the wall with the reference arrow facing up to the ceiling. Secure the plate using the four (4) 5/16" lag bolts and flat washers (supplied). See figure 13.
CAUTION: Do not over tighten the lag bolts.
Wall plate
(4) 5/16" x 3" lag bolts
and (4) flat washers
(supplied)
Marked wall
When the bottom wall plate is properly installed to the wall. Lay the carton template on top of the wall plate.
Lay the top wall plate on top of the cardboard template and mark the four (4) lag bolt mounting points.
See figure 14.
Template
Wall plate
- 16 -