LG Electronics PCM-MS2 installation manual Marking the bottom plate mounting points

Page 15

Marking the bottom plate mounting points

Place the upper portion of the bottom wall plate to the reference line and mark the four (4) lag bolt mounting points through the wall plate slots on the wall. Level the wall plate with the reference arrow pointing up to the ceiling.

See figure 11.

16"	Wall plate
	Mounting
	slots
	Wood studs
	Level

Drill gun

Pilot holes

Drill four (4) ¼" pilot holes to the marked wall.

See figure 12.

16"

- 15 -

Image 15

Contents Universal flat-panel mount Contents Description Assembly drawingElectrograph Ikegami Flat panel listRCA Parts list Parts list con’t Checking the thread depth on your flat panel Parts list con’t Finding center of the flat panel display Positioning the mounting brackets Align Mounting brackets Securing the mounting brackets Finding the wood studs behind the wall structure Mounting slot positions Look at the assembly drawing onMarking the bottom plate mounting points Securing the bottom wall plate Drill four 4 ¼ pilot holes to the marked wall. See figure Securing the top plateTightness and Security Bottom Securing the flat panel to the wall mountLateral shift Lateral shift adjustment North America