LG Electronics PCM-MS2 installation manual Lateral shift adjustment

Page 21

Lateral shift adjustment

Tilt the flat panel and secure the two (2) M6 x 12 (mm) safety knobs to each of the mounting brackets.

See figure 19.

M6 x 12

Safety knobs

NOTE: To remove the display from the wall simply extend the display to its maximum tilt range, remove the two 6 (mm) safety knurl knobs push the flat panel back to it’s flat position loosen or remove the two (2) M6 x 30 lateral shift screws and lift the unit of the wall.

- 21 -

Image 21

Contents Universal flat-panel mount Contents Description Assembly drawingElectrograph Ikegami Flat panel listRCA Parts list Parts list con’t Checking the thread depth on your flat panel Parts list con’t Finding center of the flat panel display Positioning the mounting brackets Align Mounting brackets Securing the mounting brackets Finding the wood studs behind the wall structure Mounting slot positions Look at the assembly drawing onMarking the bottom plate mounting points Securing the bottom wall plate Drill four 4 ¼ pilot holes to the marked wall. See figure Securing the top plateTightness and Security Bottom Securing the flat panel to the wall mountLateral shift Lateral shift adjustment North America