Finding the wood studs behind the wall structure
Wood stud finder
(commercially available)
16"
CENTER OF VIEWING HEIGHT DESIRED
Using a (commercially available) wood stud finder, locate the 16" or 24" stud centers behind the wall. Once found, make a pencil marking on the center of the wood studs.
See figure 9.
Mark the wall and the center of the wood studs.
NOTE: The wall plates have (3) 16" and (1)
24" mounting slot positions.
(Look at the assembly drawing on page 3)
Wood studs |
|
behind the wall |
|
structure | 16" |
|
Align the center viewing port from the carton template to the center of the wood studs horizontally. Match the center of viewing port to the center of viewing height desired and mark a line on the bottom of the carton template.
See figure 10.
- 14 -
Center of
viewing port
16"
CENTER OF VIEWING HEIGHT DESIRED
Mark the
bottom of the
carton template
Carton
template
Center of
viewing mark