Programmed Playback

The program function enables you to store your favorite tracks from any disc in the player memory. A program can contain 30 tracks.

1.Insert an Audio CD or MP3/WMA files recorded media. AUDIO CD or MUSIC menu appears.

2.Press PROGRAM. The E mark will appear.

Note:

Press PROGRAM again to exit the program edit mode, then the E mark will disappear.

Video CD: Press PROGRAM while playback is stopped. The program menu appears. Press PROGRAM again to exit the menu.

Note:

On a Video CD with PBC, you must set PBC to Off on the setup menu to use the programmed playback (See “PBC” on page 13).

3.Select a track on the “List” and then press ENTER to place the selected track on the “Program” list. Repeat to place additional tracks on the list.

4.Select the track you want to start playing on the “Program” list.

5.Press PLAY or ENTER to start. Playback begins in the order in which you programmed the tracks. Playback stops after all of the tracks on the “Program” list have played once.

6.To resume normal playback from programmed playback, select a track on the list and then press PLAY.

Repeat Programmed Tracks

Press REPEAT to select a desired repeat mode.

•Track: repeats the current track

•All: repeats all the tracks on the “Program” list.

•Off (No display): does not play repeatedly.

Note:

If you press > once during Repeat Track playback, the repeat playback cancels.

Erasing a Track from “Program” List

1.Use v V b B to select the track that you wish to erase from the Program list.

2.Press CLEAR. Repeat step 1-2 to erase additional tracks on the list.

Erasing the Complete Program List

Use v V b B to select “Clear All”, then press ENTER.

Note:

The programs are also cleared when the power is off or the disc is removed.

Playing a DVD VR format Disc

This unit will play DVD-R/RW disc that are recorded using the DVD-Video format that have been finalized using a DVD-recorder.

This unit will play DVD-RW disc that are recorded using the Video Recording (VR) format.

1.Insert a disc and close the tray. The DVD-VR menu appears on the TV screen.

2.Press v / V to select a track then press PLAY or ENTER and playback starts.

3.Press DVD MENU to move to the list menu.

Note:

•Unfinalized DVD-R/RW discs cannot be played in this player.

•Some DVD-VR disc are made with CPRM data by DVD RECORDER. Player does not support these kinds of discs.

What is ‘CPRM’?

CPRM is a copy protection system (with scramble system) only allowing the recording of ‘copy once’ broadcast programs. CPRM stands for Content Protection for Recordable Media.

Operation