Barco MGD 521 MKII To control contrast manually, To put brightness in calibrated position

Page 19

To control contrast manually

1Turn the control knob to select Contrast in the OSD main menu.

2 Press the control knob shortly. The contrast control menu appears.

3In the contrast control menu, select Manual contrast adjustment and press the control knob shortly. The contrast scroll bar appears.

4 Turn the control knob until you have reached the desired contrast.

5Press the control knob shortly or wait a few seconds to return to the contrast control menu.

6In the contrast control menu, select Exit and press the control knob shortly to return to the main menu. Alternatively, you can just wait a few seconds, and the OSD returns to the previous menu automatically.

 

Contrast scroll bar. The short stroke in the bar indicates

Contrast

 

the calibrated position, the long stroke indicates the

 

current setting.

To put brightness in calibrated position

1 Turn the control knob to select Brightness in the OSD main menu.

2Press the control knob shortly. The brightness control menu appears.

3In the brightness control menu, select Brightness CAL position and press the control knob shortly.

Brightness

-Brightness CAL position

-Manual Brightness adjustment

- Exit

Brightness control menu

To control brightness manually

1 Turn the control knob to select Brightness in the OSD main menu.

2Press the control knob shortly. The brightness control menu appears.

3In the brightness control menu, select Manual brightness adjustment and press the control knob shortly. The brightness scroll bar appears.

Brightness

Brightness scroll bar. The short stroke in the bar

 

indicates the calibrated position, the long stroke

 

indicates the current setting.

Operation20

Page 18 Page 20
Image 19
Page 18 Page 20
Contents V599326/Rev June MGD 521 MkiiTrademark information MGD 521 M Mkii Users Guide Safety Instructions MGD 521 M Mkii Users Guide Contents MGD 521 M Mkii Users Guide Overview IntroductionVersions and options Power saving systemAbout the manuals Precautions InstallationPackage contents Controls and connectors Connection of video signals Signal connectionConnection of optical sensor Connection of data signalsPositioning the display Connection of power Important considerations Operation User Controls Switching on / offPower on/off Automatic power saving system DpmsTo activate the OSD Contrast and brightness controlTo put contrast in calibrated position To put brightness in calibrated position To control contrast manuallyTo control brightness manually To view the status information Viewing Status informationExplanation of the Status information menu items Activity timeout Other adjustmentsSettings Advanced Settings and Adjustments For Service Staff onlyTo change the settings Saving the settings Explanation of the Settings menu itemsGeometry Rotation AdjustmentsHow to make the adjustments Description of the adjustmentsAdvanced SH Compensation SH Compensation ON/OFF Interlacing Pre correctionInterlacing Post correction SH Compensation optionalSH Compensation SH Position Advanced Advanced ALC optional To adjust the ALC system, proceed as followsFocus Static focus Focus zoneWhat happens upon saving? Factory resetHow to save changes Proceed as follows Luminance uniformityPicture tube MaintenanceCabinet There appears no image, the green LED is on TroubleshootingLuminance Uniformity Correction Appendix a Background InformationPage Picture tube Appendix B Technical Specifications
Top Page Image Contents