Luminance uniformity
This menu allows you to calibrate the display, including the Luminance Uniformity circuit.
Proceed as follows:
1Connect the
2 Follow the instructions on the screen.
Factory reset
This function allows you to undo all adjustments you have made since the display left the factory.
Select Go ahead to restore the factory settings.
Select Exit to return to the previous menu without erasing the adjustments.
c) How to save changes
Proceed as follows:
1After having made the adjustments, select Exit in each appearing menu until the Save Changes? message appears.
2Select Yes to save the changes.
Select No to exit the OSD menus without saving the changes.
What happens upon saving?
•When the current scanning mode was already stored in the display memory, the scanning mode is updated with the new adjustment values.
•When the scanning mode was not yet stored in the memory, the display will create a new scanning mode in the memory. However, when the memory was full, the monitor will display a list of scanning modes in the memory and ask if you wish to overwrite one of them. If you want to store the adjustments you have made, you will have to overwrite one of the scanning modes in memory.