Barco MGD 521 M Adjustments, How to make the adjustments, Description of the adjustments

Page 24

4.2Adjustments

a)How to make the adjustments

1Turn the control knob at the rear from left to right or from right to left to activate the On-Screen Display (OSD) main menu.

2 In the main menu, turn the control knob to select Adjustments.

3Press the control knob for a few seconds. The Adjustments menu appears.

Note: If you press only shortly, the message "Service protected" appears.

4Turn the control knob to select the category of adjustments you want to make.

5 Press the control knob shortly to enter the selected category.

6In the selected menu, select the adjustment you want to make and press the control knob shortly to display the adjustment scroll bar.

7Turn the control knob to perform the adjustment. After adjusting, press the knob shortly to confirm the adjustment and return to the menu, or press for a longer time to undo the adjustment and return to the menu.

8Return to the previous menu by pressing the control knob shortly or selecting Exit when present.

b)Description of the adjustments

ADJUSTMENTS

-Geometry

-Focus

-ALC

-Luminance uniformity

-Factory reset

-Exit

Adjustments menu

Geometry

Rotation

Advanced 25

Image 24

Contents MGD 521 Mkii V599326/Rev JuneTrademark information MGD 521 M Mkii Users Guide Safety Instructions MGD 521 M Mkii Users Guide Contents MGD 521 M Mkii Users Guide Introduction OverviewPower saving system Versions and optionsAbout the manuals Installation PrecautionsPackage contents Controls and connectors Signal connection Connection of video signalsConnection of data signals Connection of optical sensorConnection of power Positioning the displayImportant considerations Switching on / off Power on/offAutomatic power saving system Dpms Operation User ControlsContrast and brightness control To activate the OSDTo put contrast in calibrated position To control contrast manually To put brightness in calibrated positionTo control brightness manually Viewing Status information To view the status informationExplanation of the Status information menu items Other adjustments Activity timeoutAdvanced Settings and Adjustments For Service Staff only SettingsTo change the settings Explanation of the Settings menu items Saving the settingsAdjustments How to make the adjustmentsDescription of the adjustments Geometry RotationAdvanced Interlacing Pre correction Interlacing Post correctionSH Compensation optional SH Compensation SH Compensation ON/OFFSH Compensation SH Position Advanced Advanced To adjust the ALC system, proceed as follows Focus Static focusFocus zone ALC optionalFactory reset How to save changes Proceed as followsLuminance uniformity What happens upon saving?Maintenance Picture tubeCabinet Troubleshooting There appears no image, the green LED is onAppendix a Background Information Luminance Uniformity CorrectionPage Appendix B Technical Specifications Picture tube