Barco MGD 521 MKII user manual Safety Instructions

SAFETY INSTRUCTIONS

			• Read the safety and operating instructions
			before operating the apparatus.
			• Retain safety and operating instructions for
			future reference.
			• Adhere to all warnings on the apparatus
			and in the operating instructions manual.
			• Follow all instructions for operation and
			use.
Regulations			to an AC voltage as indicated at its back.
• This apparatus conforms to:		IEC601-1,	Using a lower voltage, the apparatus will not
UL2601-1, cUL2601-1, EN 60601-1			be able to operate. Using a higher voltage
• This apparatus is classified as Type B			may damage the apparatus.
without Applied Part.			If you are not sure of the type of power
			supplied, consult the power company.
Usage in Hazardous locations			• Do not overload wall outlets and extension
• Class I equipment			cords as this may result in fire or electric
			shock.
• Equipment not suitable for use in the
presence of a flammable anaesthetic			• Mains lead protection (U.S.: Power cord):
mixture with air or with oxygen or nitrous			Supply cords should be routed so that they
oxyde.			are not likely to be walked upon or pinched by
			items placed upon or against them, paying
FCC notice			particular attention to cords at plugs and
This equipment has been tested and found			receptacles.
to comply with the limits of a class A digital			Water and moisture
device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide			• Never expose the apparatus to rain or
reasonable protection against harmful			moisture.
interference when the equipment is operated			• Never use the apparatus near water - e.g.
inacommercialenvironment.Thisequipment			near a bathtub, washbasin, swimming pool,
generates, uses and can radiate radio			kitchensink,laundrytuborinawetbasement.
frequency energy and, if not installed and			Ventilation
used in accordance with the instruction			•Donotcoverorblocktheventilationopenings
manual, may cause harmful interference to
radio communications. Operation of this			in the cover of the set. When installing the
			apparatus in a cupboard or another closed
equipment in a residential area is likely to			location, heed the necessary space between
cause harmful interference in which case the			the set and the sides of the cupboard.
userwillberequiredtocorrecttheinterference
at his own expense.			Installation
!			• Place the apparatus on a flat, solid and
	Power connection		stable surface that can bear the weight of at
			least 3 monitors. If you use an unstable cart
• Power cord: Utilise a UL-listed detachable
power cord, 3-wire, type SJ or equivalent, 18			or stand, the set may fall, causing serious
AWG min., rated 300 V min., provided with a			injury to a child or adult, and serious damage
hospital-grade type plug 5-15P configuration			to the equipment.
for	120V application, or 6-15P	for 240V	More warnings in the Installation chapter.

application.

•Warning: This apparatus must be earthed!

•Powerrequirements:connecttheapparatus

MGD 521 M - MKII User's Guide 5