Barco MGD 521 M Advanced Settings and Adjustments For Service Staff only, To change the settings

Page 22

4.ADVANCED SETTINGS AND ADJUSTMENTS

(FOR SERVICE STAFF ONLY)

Important:

The functions and controls described in this chapter can have a serious impact on the performance of the display. They should be touched by trained service staff only!

4.1 Settings

SETTINGS INFORMATION

- LUC	OFF
- ALC	OFF
- Orbiter	OFF
- Power save	ON
- Display address	1
- User controls disable OFF		The Settings menu
- Exit		The Settings menu

To change the settings

1Turn the control knob at the rear from left to right or from right to left to activate the On-Screen Display (OSD) main menu.

2 In the main menu, turn the control knob to select Settings.

3Press and hold the control knob for a few seconds.

The Settings menu appears. It displays each setting and its current status.

Note: If you press only shortly, the message "Service protected" appears.

4Turn the control knob to select the setting you want to change.

5 Press the control knob shortly to change the selected setting.

6For Display address, you can change the setting by turning the control knob. Return to the Settings menu by pressing the control knob.

For the other settings, the new status instantly appears in the Settings menu.

Advanced 23

Image 22

Contents MGD 521 Mkii V599326/Rev JuneTrademark information MGD 521 M Mkii Users Guide Safety Instructions MGD 521 M Mkii Users Guide Contents MGD 521 M Mkii Users Guide Introduction OverviewPower saving system Versions and optionsAbout the manuals Precautions InstallationPackage contents Controls and connectors Signal connection Connection of video signalsConnection of data signals Connection of optical sensorConnection of power Positioning the displayImportant considerations Automatic power saving system Dpms Switching on / offPower on/off Operation User ControlsTo activate the OSD Contrast and brightness controlTo put contrast in calibrated position To put brightness in calibrated position To control contrast manuallyTo control brightness manually To view the status information Viewing Status informationExplanation of the Status information menu items Other adjustments Activity timeoutSettings Advanced Settings and Adjustments For Service Staff onlyTo change the settings Explanation of the Settings menu items Saving the settingsDescription of the adjustments AdjustmentsHow to make the adjustments Geometry RotationAdvanced SH Compensation optional Interlacing Pre correctionInterlacing Post correction SH Compensation SH Compensation ON/OFFSH Compensation SH Position Advanced Advanced Focus zone To adjust the ALC system, proceed as followsFocus Static focus ALC optionalLuminance uniformity Factory resetHow to save changes Proceed as follows What happens upon saving?Picture tube MaintenanceCabinet Troubleshooting There appears no image, the green LED is onAppendix a Background Information Luminance Uniformity CorrectionPage Appendix B Technical Specifications Picture tube