Barco MGD 521 MKII user manual Viewing Status information, To view the status information

Page 20

4Turn the control knob until you have reached the desired brightness.

5Press the control knob shortly or wait a few seconds to return to the brightness control menu.

6In the brightness control menu, select Exit and press the control knob shortly to return to the main menu. Alternatively, you can just wait a few seconds, and the OSD returns to the previous menu automatically.

3.3Viewing Status information

You can view the status and actual settings of the display. You cannot change them in the Status Menu. Changing the settings is reserved for trained service staff only.

To view the status information

Turn the control knob to select Status information in the OSD main menu.

The Status information menu appears. The only control in the menu is Exit.

STATUS INFORMATION

Display Name:

MGD 521MKII

Serial Number:

5114147

Mode Name:

New mode

Mode H-frequency: 175.32 kHz

Mode V-frequency:

79.94 Hz

Software Version:

V 1.01

Run time:

50 hours

White level:

300 cd/m2

Activity timeout

30s

SH compensation

OFF

Actual H-frequency:125.30kHz

Actual V-frequency: 80.00 Hz

- Exit

Example of Status information menu for MGD 521 MKII displays

Explanation of the Status information menu items

Display Name:

This is the display type.

Serial Number:

This is the display's serial number.

Mode Name:

The currently selected scanning mode.

Mode H-frequency, Mode V-frequency:

These are the horizontal and vertical sync frequencies of the currently selected scanning mode. These are the figures stored in the memory.

Operation21

Image 20
Contents MGD 521 Mkii V599326/Rev JuneTrademark information MGD 521 M Mkii Users Guide Safety Instructions MGD 521 M Mkii Users Guide Contents MGD 521 M Mkii Users Guide Introduction OverviewPower saving system Versions and optionsAbout the manuals Package contents InstallationPrecautions Controls and connectors Signal connection Connection of video signalsConnection of data signals Connection of optical sensorConnection of power Positioning the displayImportant considerations Switching on / off Power on/offAutomatic power saving system Dpms Operation User ControlsTo put contrast in calibrated position Contrast and brightness controlTo activate the OSD To control brightness manually To control contrast manuallyTo put brightness in calibrated position Explanation of the Status information menu items Viewing Status informationTo view the status information Other adjustments Activity timeoutTo change the settings Advanced Settings and Adjustments For Service Staff onlySettings Explanation of the Settings menu items Saving the settingsAdjustments How to make the adjustmentsDescription of the adjustments Geometry RotationAdvanced Interlacing Pre correction Interlacing Post correctionSH Compensation optional SH Compensation SH Compensation ON/OFFSH Compensation SH Position Advanced Advanced To adjust the ALC system, proceed as follows Focus Static focusFocus zone ALC optionalFactory reset How to save changes Proceed as followsLuminance uniformity What happens upon saving?Cabinet MaintenancePicture tube Troubleshooting There appears no image, the green LED is onAppendix a Background Information Luminance Uniformity CorrectionPage Appendix B Technical Specifications Picture tube