Stewart Filmscreen Corp 4-Way ScreenWall ElectriMask owner manual Attaching the screen to frame

Page 10

Attaching the screen to frame

1.Place the frame over the screen.

2.While lifting the frame with one hand, snap the screen into the frame. Gently allow the screen to stretch onto the snaps. Do not jerk the material, as it can rip. See Figure 6. Attach the snaps on the top corners and top horizontal first, then lift the frame to a vertical position to finish attaching the rest of the snaps.

Caution

Do not use any tools to fasten the screen to the frame.

Figure 6: Snapping screen onto frame

8	Stewart Filmscreen Corporation

Image 10

Contents Way ScreenWall ElectriMask Page Contents Way ScreenWall ElectriMaskVertical Masking System To the OwnerAbout your 4-Way ScreenWall ElectriMask Horizontal Masking SystemRow Diag Size 33/1 Size Table Attainable Aspect RatiosPreparation Preparing the InstallationUnpacking Mounting the Frame Assembling the framePositioning the frame on the wall Wall BracketUnpacking and unrolling the screen Unrolling the screenAttaching the screen to frame Snapping screen onto frame Stewart Filmscreen CorporationConnecting the spring tension cable Spring Tension Cable Baby Eye Snap EyeletElectrical HOOK-UP Horizontal Mask Connection Vertical Mask ConnectionPreparing the connection Installing the high voltage switch control standardScreen Switch Making the connectionsMaking the connection Installing the low-voltage 3-button switch optionButton Momentary Switch Low Voltage Control BoxInstalling the infrared remote control option Infrared Sensor Infrared Remote ControlMcir Control Board Infrared Installing the Multi-Channel Infrared Remote control optionSensor Terminal Block To 12V Trigger Wire to Projector Connecting the Video Interface Control System VicsRomex Connector Conductor Cable 14ga Recommended Pin conductorsHanging the Frame on the Wall Hanging the screen Stewart Filmscreen CorporationAdjusting the Mask Extension Operating the MaskModifying the extension of the mask Horizontal Mask Vertical Mask ScreenReplacement parts and service Screen Care and CleaningGeneral maintenance Velux coveringTroubleshooting Problem description Probable cause Action to takeProblem is resolved Product WarrantyAdjustment. Failure to correc t Can damage motor and screen