Stewart Filmscreen Corp 4-Way ScreenWall ElectriMask owner manual

Page 2

Printed in U.S.A.

Stewart Filmscreen reserves the right to make changes to the product specified in this document.

From time to time, this document is updated. Current versions of documentation are posted on the Stewart Filmscreen website at www.stewartfilm.com.

Image 2

Contents Way ScreenWall ElectriMask Page Contents Way ScreenWall ElectriMaskVertical Masking System To the OwnerAbout your 4-Way ScreenWall ElectriMask Horizontal Masking SystemRow Diag Size 33/1 Size Table Attainable Aspect RatiosUnpacking Preparing the InstallationPreparation Mounting the Frame Assembling the framePositioning the frame on the wall Wall BracketUnpacking and unrolling the screen Unrolling the screenAttaching the screen to frame Snapping screen onto frame Stewart Filmscreen CorporationConnecting the spring tension cable Spring Tension Cable Baby Eye Snap EyeletElectrical HOOK-UP Horizontal Mask Connection Vertical Mask ConnectionPreparing the connection Installing the high voltage switch control standardScreen Switch Making the connectionsMaking the connection Installing the low-voltage 3-button switch optionButton Momentary Switch Low Voltage Control BoxInstalling the infrared remote control option Infrared Sensor Infrared Remote ControlSensor Installing the Multi-Channel Infrared Remote control optionMcir Control Board Infrared Terminal Block To 12V Trigger Wire to Projector Connecting the Video Interface Control System VicsRomex Connector Conductor Cable 14ga Recommended Pin conductorsHanging the Frame on the Wall Hanging the screen Stewart Filmscreen CorporationAdjusting the Mask Extension Operating the MaskModifying the extension of the mask Horizontal Mask Vertical Mask ScreenReplacement parts and service Screen Care and CleaningGeneral maintenance Velux coveringTroubleshooting Problem description Probable cause Action to takeProblem is resolved Product WarrantyAdjustment. Failure to correc t Can damage motor and screen