Teledyne Table Of Contents, M102E/M501 TRS, Rev A1, Addendum to M101E Manual - P/N 04740 Rev A

M102E/M501 TRS
(Addendum to M101E Manual - P/N 04740 Rev A)
TABLE OF CONTENTS
1. PREFACE	1
1.1. Reference Numbering convention	2
2. SPECIFICATIONS, APPROVALS AND WARRANTY	3
2.1. Specifications	3
2.1.1. M501-TRS Specifications	3
2.2. EPA Equivalency Designation	3
2.3. CE Mark Compliance	4
3. GETTING STARTED	5
3.1. Unpacking the M102E	5
3.2. Unpacking the M501-TRS	5
3.2.1. M501-TRS Ventilation Clearance:	6
3.3. Internal Layouts	7
3.4. Internal Pneumatic Flow of the M102E & the M501-TRS	8
3.5. Rear Panel Layout for the M102E & M501-TRS	9
3.6. Initial Setup	10
3.6.1. Electrical Connections:	10
3.6.1.1. M102E Analog Output Connections	10
3.6.1.2. M501-TRS Alarm Output Connections	11
3.6.2. Pneumatic Connections:	11
3.6.2.1. Connections with Internal Valve Options Installed	14
3.7. Initial Operation	17
3.7.1. Startup / Warm Up of the M102E	17
3.7.2. Functional Check of the M102E	17
3.7.3. Startup / Warm Up of the M501-TRS	18
3.8. Initial Calibration	19
4. OPTIONAL HARDWARE AND SOFTWARE	21
4.1. Rack Mount Kits (Options 20a, 20b, 21, 22 & 81)	21
4.2. Calibration Valves Options	21
4.2.1. Zero/Span Valves (Option 50) & Internal Zero/Span Gas Generator (Option 51)	21
4.3. Additional Manuals	24
4.3.1. Printed Manuals (P/N 049880000)	24
4.3.2. Addendum on CD (Part number 049880200)	24
5. M102E OPERATING INSTRUCTIONS	25
5.1.1. M102E Analog Output Signals	25
5.1.2. Setting the M102E Gas Measurement Mode	26
5.2. SETUP – DIAG: Using the Diagnostics Functions	26
5.2.1. M102E Analog I/O Configuration	26
5.2.2. M102E Test Channel Output	27
5.3. SETUP – COMM: Setting Up the M102E’s Communication Ports	27
5.3.1. M102E ID Code	27
5.3.2. M102E Ethernet Host Name	27
5.4. Remote Operation of the Analyzer	28
5.4.1. Control Inputs	28
5.4.2. Using the M102E with a Hessen Protocol Network	29
5.4.2.1. M102E Hessen Protocol Gas ID List	29
5.4.2.2. Setting Hessen Protocol Status Flags	30
6. M501-TRS OPERATING INSTRUCTIONS	31
6.1. Basic M501-TRS Controls	31
6.2. To Display The Current Temperature:	32
6.3. To Manually Adjust the Converter Oven Temperature:	33
6.4. Autotune the Temperature Controller:	34
6.4.1. Initiating the Autotune Process:	34
6.4.2. Aborting the Autotune Process:	35
6.5. M501TRS Alarm Relay Adjustment	35
7. CALIBRATION PROCEDURES	37
7.1. M102E Calibration	37
7.2. M501-TRS Calibration	37

05514 Rev A1 i