Emerson LC420EM8 owner manual 5Main Menu, 5Auto Channel Scan

INITIAL SETTING

5Main Menu

This section describes the overview of the main menu displayed when you press [SETUP]. For more details, see the reference page for each item. The main menu consists of the function setting items below.

5Auto Channel Scan

If you switch wires (e.g., between antenna and CATV) or if you move the unit to a different area after the initial setting, or if you restore the DTV channel you deleted, you will need to perform auto channel scan.

Press [SETUP].

•EXIT

To exit settings.

•PICTURE

You can adjust the picture quality.

(Refer to “Picture Adjustment” on page 22.)

•SOUND

You can adjust the sound quality.

(Refer to “Sound Adjustment” on page 23.)

•CHANNEL

You can automatically scan the viewable channels and remove those that are undesired.

(Refer to “Auto Channel Scan” on page 14.)

•DETAIL

You can change the display format for closed caption, which displays the dialogue of a TV program or other information across the TV screen.

(Refer to “Closed Caption” on page 24.) Set the viewing limitations.

(Refer to “V-chip” on page 28.)

Select the sound input for the HDMI1 input jack if your unit is connected to an HDMI device.

(Refer to “HDMI Audio” on page 31.)

•LANGUAGE

You can change the language (English, Spanish, French) displayed on the main menu.

(Refer to “Language Selection” on page 15.)

Before you begin:

Make sure if the unit is connected to antenna or cable.

1Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “CHANNEL” , then press [ENTER].

3Use [Cursor K/L] to select “Autoscan”, then press [ENTER].

Channell

Autoscan

Channel List

Manual Register

Antenna

Use [Cursor K/L] to select an appropriate option, then press [ENTER].

Autoscan

Autoscan will rescan all channels.		Back
This may take a while to complete.		Air
Select the destination of "ANT.IN" jack.		Cable
Air		Cable
		1hour
Cable	Or
	ANT.IN

•When aerial antenna is connected, select “Air”.

•When connected to CATV, select “Cable”.

•Scanning and memorizing of channels start automatically.

Now the system is scanning for channels, please wait.

72%

Analog channels		10ch
Digital channels		6ch
SETUP	Exit

•When the scanning and memorizing are completed, the lowest memorized channel will be displayed.

14

EN