Emerson LC420EM8 owner manual 5Language Selection, Press Setup to exit

Note:

•If you connect the cable system directly, contact the CATV installer.

•If you press [POWER] or [SETUP] during auto channel scan, the setting will be canceled.

•Channel settings will be saved even if the power fails.

•If you need the English menus instead of the Spanish or French menus you are having, press [SETUP]. Use [Cursor K/L] to select “IDIOMA” or “LANGUE”, then press [ENTER]. Use [Cursor K/L] to select “English”, then press

[ENTER]. Press [SETUP] to exit the main menu.

•With regard only to the digital channel, even after the scanning is complete if you unplug the AC power cord before turning off the unit by pressing [POWER], the channel setting may be lost.

5Language Selection

You can choose English, Spanish, or French as your on-screen language.

1Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “LANGUAGE”, then press [ENTER].

3Use [Cursor K/L] to select “English”, “Español” or “Français”, then press [ENTER].

Language

Select the language for setup display.	English
Elija el idioma de ajuste.	Español
Sélectionner langue écran config.	Français

4Press [SETUP] to exit.

INTRODUCTION PREPARATION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION

15

EN