ViewSonic PJD5152, PJD5352 warranty Substance, Actual Concentration, Lead Pb Mercury Hg Cadmium Cd

Page 3

Declaration of RoHS Compliance

This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below:

Substance

Proposed Maximum

Actual Concentration

Concentration

 

 

 

 

 

Lead (Pb)

0.1%

< 0.1%

 

 

 

Mercury (Hg)

0.1%

< 0.1%

 

 

 

Cadmium (Cd)

0.01%

< 0.01%

 

 

 

Hexavalent Chromium (Cr6+)

0.1%

< 0.1%

Polybrominated biphenyls (PBB)

0.1%

< 0.1%

 

 

 

Polybrominated diphenyl ethers (PBDE)

0.1%

< 0.1%

 

 

 

Certain components of products as stated above are exempted under the Annex of the RoHS Directives as noted below:

Examples of exempted components are:

1.Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically mentioned in the Annex of RoHS Directive.

2.Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic ceramic parts (e.g. piezoelectronic devices).

3.Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).

4.Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.

ii

Image 3
Contents ViewSonic Compliance Information Hexavalent Chromium Cr6+ Polybrominated biphenyls PBB SubstanceActual Concentration Lead Pb Mercury Hg Cadmium CdCopyright Information Table of contents Important safety instructions Safety InstructionsSafety instructions for ceiling mounting of the projector Projector features IntroductionIntroduction Shipping contents Projector exterior view Controls and functions Projector and remote controlAuto Lamp indicator lightColor Mode Volume keys +Pull out the battery holder Remote control effective rangeChoosing a location Positioning your projectorScreen Center of lens Projection dimensionsTo connect the projector to a notebook or desktop computer Connecting a computer or monitorConnecting a computer ConnectionConnecting a monitor To connect the projector to a monitorMonitor Computer VGA to DVI Cable VGA cable Better video quality Connecting Video source devicesConnecting audio Best video qualityTo connect the projector to a Component Video source device Connecting a Component Video source deviceConnecting an S-Video source device To connect the projector to an S-Video source deviceAV device Speakers Audio cable Video cable Cable Connecting a composite Video source device To connect the projector to a composite Video source deviceSpeakers AV device Video cable Audio cable Cable Operation Starting up the projectorOperation See Timing chart on page 52 for details System Setup Advanced Using the menusUse / to highlight the System Setup Basic menu System Setup BasicNew password Utilizing the password functionSetting a password If you forget the passwordEntering the password recall procedure Changing the passwordDisabling the password function Switching input signal Adjusting the projected image Adjusting the projection angleAuto-adjusting the image MODE/ENTER on the projector or Enter Fine-tuning the image size and clarityOn the remote control. The Keystone Correcting keystoneSelecting the aspect ratio Magnifying and searching for detailsAbout the aspect ratio Video input signals S-Video, Video, D-Sub / Comp /2 YPbPr Selecting a picture modePicture modes for different types of signals PC input signals D-Sub / Comp /2 analog RGBAdjusting Brightness Using Screen ColorFine-tuning the image quality in user modes Setting the User 1/User 2 modeAdjusting Brilliant Color Adjusting ColorAdjusting Tint Adjusting SharpnessColor Management To adjust the settingsHiding the image Locking control keysOrder to draw the audiences full attention to Press MENU/EXIT on the projector or Menu To activate the High Altitude ModeFreezing the image Operating in a high altitude environmentShutting down the projector Personalizing the projector menu displayMenu operation Menu systemMain menu Sub-menu Options Advanced BasicDescription of each menu Mode Color ModeSettings ReferenceProjector Auto PowerBlank Timer TimerMenu System Setup Advanced menu Function Description Active VGAOut AudioCurrent Advanced Settings Reset AllLamp SecurityCare of the projector MaintenanceGetting to know the lamp hour Setting Lamp mode as EconomicSetting Auto Power Off Lamp informationStatus Message Timing of replacing the lampReplacing the lamp Type number RLC-055Loosen the screw that secures the lamp Maintenance Resetting the lamp timer Tighten the screw that secures the lampRestart the projector Lamp events IndicatorsPower events Light Status & DescriptionCause Remedy TroubleshootingProjector specifications SpecificationsDimensions Ceiling mount installationTiming chart Horizontal Signal Format Horizontal Frequency kHz Vertical Frequency HzCopyright information Copyright informationPin assignment for this two end RS232 command tableAppendix IR control tableData Length Bit Parity Check None Stop Bit InterfaceRS-232 protocol Baud RateContrast Write Blank on 0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x09 0x01 VGA Hour Customer Support Limited Warranty PRJLW01 Rev h How to get serviceViewsonic Projector Mexico Limited WarrantyNúmero Gratis DE Asistencia Técnica Para Todo México