ViewSonic PJD5152 Projector, Auto Power, Off, Blank Timer, Panel Key, Lock, Controller, Splash

4. SYSTEM SETUP: Basic menu

5. SYSTEM SETUP: Advanced menu

Function	Description
Language	Sets the language for the On-Screen Display (OSD) menus. See
	"Using the menus" on page 21 for details.
Projector	The projector can be installed on a ceiling or behind a screen, or
Position	with one or more mirrors. See "Choosing a location" on page 11
	for details.
Auto Power	Allows the projector to turn off automatically if no input signal
Off	is detected after a set period of time. See "Setting Auto Power
	Off" on page 44 for details.
Blank Timer	Sets the image blank time when the Blank feature is activated,
	once elapsed the image will return to the screen. See "Hiding the
	image" on page 33 for details.
Panel Key	Disables or enables all panel key functions except II POWER
Lock	on the projector and keys on the remote control. See "Locking
	control keys" on page 33 for details.
Timer	Sets the auto-shutdown timer. The timer can be set to a value
Controller	between 30 minutes and 12 hours.
Splash	Allows you to select which logo screen will be displayed during
Screen	projector start-up. Three options are available: ViewSonic logo,
	Black screen, or Blue screen.
Message	Selecting On displays the current information on the screen
	when the projector is detecting or searching for a signal.
	Selecting On enables the function and the projector cooling time
Quick	will be shortened to a few seconds.
Cooling	If you attempt to restart the projector right after the quick
	cooling process, it may not be turned on successfully and
	will rerun its cooling fans.
High Altitude	A mode for operation in high altitude areas. See "Operating in a
Mode	high altitude environment" on page 34 for details.
	Enables or disables the DCR (Dynamic Contrast Ratio) function.
	Selecting On enables the function and the projector will
	automatically switch the lamp mode between normal and
DCR	economic modes according to the input image detected.
	This function is only available when a PC source is in use.
	After enabling DCR, frequent lamp mode switching may
	shorten lamp life and noise level will vary during operation.

40 Operation