|
|
| Troubleshooting (continued) | |
|
|
|
|
|
| Problem (USB/HDMI) |
| Solution |
|
The contents of the USB | – | The USB flash drive format is not compatible with the | ||
flash drive cannot be read. |
| system. | ||
|
| – | Drive is formatted with a different file system which is | |
|
|
| not supported by this DVD recorder (e.g., NTFS). | |
English
Slow operation of the USB flash drive.
The connected card reader/flash drive is not detected. The message ‘USB Hub is not supported’ appears.
No sound on HDMI connection.
No picture on HDMI connection.
–Large file size or high memory USB flash drive takes longer time to read and display on the TV.
–This recorder only supports Mass Storage Class (MSC) devices. Not all card readers/flash drives implement this standard. Please use another device.
–You may not hear any sound from the HDMI output if the connected device is
–It is not possible to output SACD or
–Make sure that you have activated this recorder as the HDMI input in the settings for the device you are using. Press OPTIONS on the remote control, go to Video setting and set the { Active Video Output } to
{ HDMI Output }.
–HDMI connection can only be made to
–Make sure the resolution of this recorder matches the device you have connected using the HDMI. See HDMI setting.
–Check if the HDMI cable is faulty. Replace a new HDMI cable.
–When connecting to a
Picture output through | – Change the HDMI video resolution as follows: | |
the HDMI connection | 1) | Press OPTIONS on your remote control. |
does not look good. | 2) | Select { Settings } > { Video Output } > { HDMI } in |
|
| the menu. |
| 3) | Select { Manual } > { 480p/560p }. |
103