Before Recording (continued)
Recording settings (underlined options are the factory default settings)
English
Chapters
Audio record mode
Automatically divides a recording (title) into chapters by inserting chapter markers at a specific interval. This enables you to access a specific point in the recording quickly.
{Smart } – Chapter markers will be inserted at the beginning and end of each commercial block automatically after recording ended.
–For DV camcorder recording only, a chapter
marker is inserted whenever there is a break in the time code on the DV tape.
{ Off } – No chapter marker is inserted in the recording.
{Standard } – Chapter markers are inserted automatically during recording at approximately 5 (five) minutes interval.
Notes: { Smart } setting
–This can only happen when you put the recorder to standby mode after the recording is completed. While in standby mode, minor noise and heat will be generated due to commercial chapter marking operation is in progress. Every one hour of recording requires at least 30 minutes of processing time. Previous recordings before you turn on this feature will not be processed.
–When watching the recording, you can press NEXT > button on the remote control to skip over commercials.
–Accuracy of commercial block detection depends on the broadcasting parameters.
Select the type of audio mode for digital recording.
{Stereo } – Disable digital audio input. Record audio in stereo mode.
{Multichannel } – Record audio in
Note:
37