PYLE Audio DVDR5520H TV shape Active video output Video format, Scart RGB For Scart connection

English

System Menu Options (continued)

Video Output settings (underlined options are the factory default settings)

TV shape

Active video output

Video format

The picture shape can be adjusted to fit your TV.

{4:3 Letterbox } – For a ‘wide-screen’ display with black bars on the top and bottom.

{4:3 Panscan } – For a full-height picture with the sides trimmed.

{16:9 Widescreen } – For wide-screen TV

(frame ratio 16:9).

Select the type of video output that matches the video connection between this recorder and your TV.

{SCART (RGB) } – For SCART connection.

{Comp. Video (YUV) } – For Component video connection. To enable progressive scan feature, go to

{Video format } setting.

{HDMI output } – For HDMI connection.

Note: Video output setting is not required for S-Video or Composite (CVBS) video connection.

This feature is only applicable to Component video connection. You can choose between progressive and interlaced video format, check your TV for compatibility.

{Progressive } – Turn on progressive scan mode. Select this if your TV is progressive-scan compatible.

{Interlaced } – For TV that is not compatible with progressive-scan video.

Note: If you choose a setting that is incompatible with your TV, you may not be able to see any picture at all. In this case, wait for 15 seconds for auto recovery or turn off the progressive scan as below:

1)Disconnect this unit’s ~MAINS from the power supply.

2)Hold down . on this unit whilst reconnecting its ~MAINS to the power supply.

82