PYLE Audio DVDR5520H user manual Option

Step 1: Basic Recorder Connections (continued)

				DIGITAL	HDMI
				ANTENNA INPUT
		ANTENNA INTERCONNECT CABLE	DIGITAL ANTENNA		OUT	MAIN
		(OPTIONAL, REFER TO MANUAL)	LOOP THROUGH		CVBS-OUT	PB
					Y
G-LINK	TO TV	EXT1	TO VCR/SAT	EXT2	L

			R
TO TV ANTENNA	ANALOG	S-	AUDIO	COAXIAL	COMPONENT
INPUT	ANTENNA INPUT		OUT	DIGITAL OUT	VIDEO OUT	IN

Option 4

TV

English

Option 4: Using Component video socket / Connecting to a Progressive Scan TV

The progressive scan video quality is only available when using Y Pb Pr connection and a progressive scan TV is required. It provides superior picture quality when watching DVD movies.

A Connect the component video cables (red/ blue/green - not supplied) from the Y PB PR sockets on the recorder to the corresponding component video input sockets (usually labelled as Y Pb/Cb Pr/Cr or YUV) on the TV.

B Connect the audio cable (red/white - not supplied) from the AUDIO OUT sockets on the recorder to the audio input sockets on the TV.

Note:

To enable Y Pb Pr (YUV) connection, you must set the recorder’s video output correctly.

A Make an addition video connection from

this recorder to your TV using Scart, S-Video or Video (CVBS).

B Turn on your TV to the correct viewing channel for the above video connection.

C When you have completed the installation and set-up, change the video output setting of this recorder as follows:.

1)Press OPTIONS.

2)Move to { Settings } > { Video output } > { Active video output } > { Comp. video (YUV) }, then press OK to confirm.

To activate Progressive Scan output, see ‘Other information - Setting up Progressive Scan feature’ for details.

D Switch your TV to the correct viewing channel for the Component video connection (refer to your TVs user manual).

19