Sanyo TLS-224P instruction manual Autorepeat Recording, Setting the Mode at the End of the Tape

Page 14

AUTOREPEAT RECORDING

Autorepeat Recording

The same tape can be recorded over many times.

1Press the AUDIO ON/MENU button until the (SET UP 3) menu is displayed.

°The “ALARM MODE” setting is flashing.

<SET UP 3>

 

ALARM MODE

Y1

ALARM SPEED

3H

ALARM DURATION

20S

TAPE IN MODE

STOP

TAPE END MODE

REW

TAPE END OUT

-3M

CLOG DETECT.

Y

GB

2Press the ] button, until the “TAPE END MODE” setting is flashing.

3Press the l (or j) button to set to “R 1” or “R 2”. (See “Setting the Mode at the End of the Tape”)

4Press the PAUSE/SCAN button, the normal screen is displayed.

°The REPEAT LED will light.

°The setting procedure is now completed.

5Press the REC button.

°Recording will start. When the tape end is reached, the VCR will rewind it to the beginning, and recording will resume.

NOTES:

If during autorepeat recording there is an alarm trigger, “AL” is displayed on the digital display and alarm recording will take place. (Please refer to page 14, “ALARM RECORDING”.)

If the “TAPE END MODE” setting is R 1, the REPEAT LED will go off if there is an alarm trigger. The recording will continue to the end of the tape then it will be rewound to the beginning and stop. “OFF” will be displayed on the digital display.

Setting the Mode at the End of the Tape

In the (SET UP 3) menu, you can set the mode of the VCR mode when the tape reaches the end during recording.

1Press the AUDIO ON/MENU button until the (SET UP 3) menu is displayed.

<SET UP 3>

 

ALARM MODE

Y1

ALARM SPEED

3H

ALARM DURATION

20S

TAPE IN MODE

STOP

TAPE END MODE

REW

TAPE END OUT

-3M

CLOG DETECT.

Y

2Press the ] button, until the “TAPE END MODE” setting is flashing.

3Press the l (or j) button, to set the desired mode.

REW. . . . . . . . . . . Rewinds the tape to the beginning, then goes to stop mode

STOP . . . . . . . . . . Goes to stop mode

EJECT . . . . . . . . . The cassette is ejected

R1. . . . . . . . . . . . . The autorepeat mode is automatically canceled if there was an alarm trigger

R2. . . . . . . . . . . . . Autorepeat mode is active even if there was an alarm trigger

4Press the PAUSE/SCAN button to save the setting

English

13

Image 14
Contents EnglishGB DeutschDPower on/stand-by mode PrecautionsMoisture Condensation Problems LocationFeatures ContentsLocations of Controls and Indicators Front PanelOperation Mode Indicator Locations of Controls and IndicatorsDigital Display Operation Indicators PLAY, STOP, FF or REW button123456789 Back PanelConnections VideoTypes of ON-SCREEN Displays and Display Sequence Buttons functionsClock setting Setting the Language and ClockLanguage Setting Day of week is set automaticallyChanging the Date/Time Display Position Changing the ON-SCREEN DisplaySelecting the On-screen Display Video Cassette Tapes Normal Recording Record indicator a lights Recording startsPause/Still indicator blinks Normal RecordingClog Detection Normal RecordingRecording Check Eject buttonRepeat LED will light Setting procedure is now completed Setting the Mode at the End of the TapeAlarm Mode setting is flashing Autorepeat RecordingAlarm Recording Alarm Recording SettingConnections to the Alarm IN/OUT Alarm RecordingAlarm Recording Counter Display Checking the Alarm Recordings TimeAlarm Scan Playback will start, alarm scan mode is cancelledProgramme Timer Recording Changing a Programme Timer Recording Programme Timer RecordingSetting the Holidays To Cancel a Programme Timer Recording700PM 800PM 900PM 1000PM Programme Recording Using AN External Timer Input Tracking Control Normal PlaybackNormal Playback Vertical Lock ControlFrame Advance Special PlaybackPicture Search Still ImageIs displayed on the digital display Setting the Security LockSetting the Buzzer Checking Usage Duration To CondensationTape END OUT Terminal Tape END OUT Terminal Output SettingOutput Terminals COM TerminalSW OUT Terminal SW OUT Terminal Output SettingOutput Terminals Remote JackMaintenance System Down Troubleshooting GuideAfter a Power Failure Specifications General SpecificationsNE4QG/EX