Sanyo TLS-224P Alarm Recording Counter Display, Connections to the Alarm IN/OUT, Terminals

Page 16

ALARM RECORDING

Alarm Recording Counter Display

•During alarm recording, “AL” will be flashing on the digital display.

•If the ON SCREEN switch is set to the “ON” position, the number of alarms will flash on the monitor screen.

•The maximum display number of alarm triggers is “999”, at the next alarm recording the counter will indicate “000”.

•When the (ALARM TIME) menu is displayed, press the MENU RESET button to reset the alarm counter to “000” (all the data of the (ALARM TIME) menu is reset).

GB

Connections to the ALARM IN/OUT

 

 

Terminals

 

• Alarm input signal

 

Connect a make-contact (no voltage) switch between

 

the ALARM IN and COM terminals.

 

• Alarm output signal

 

Normally DC 5V are output between the ALARM

 

OUT and the COM terminals. When an alarm input

 

(trigger) is received and the unit is recording, the

 

output falls to 0V. Once the alarm recording is over,

 

the output returns to DC 5V.

Checking the Alarm Recordings Time

1Press the AUDIO ON/MENU button until the (ALARM TIME) menu is displayed.

°The number of alarm triggers, and the 8 most recent alarm recording times are displayed.

Example

<ALARM TIME> 008 12-12 19:00 12-11 23:00 12-11 15:00 11-10 08:00 11-10 06:00 10-09 20:00 10-09 16:35 10-09 10:52

NOTE:

•The data for the previous alarm recordings is erased.

2Press the PAUSE/SCAN button, the normal screen is displayed.

NOTE:

•If the MENU RESET button is pressed while the (ALARM TIME) menu is displayed, the displayed data is erased.

“AL” will be erased from the digital display.

English

15

Page 15 Page 17
Image 16
Page 15 Page 17
Contents EnglishGB DeutschDPrecautions Moisture Condensation ProblemsPower on/stand-by mode LocationFeatures ContentsLocations of Controls and Indicators Front PanelLocations of Controls and Indicators Digital Display Operation IndicatorsOperation Mode Indicator PLAY, STOP, FF or REW button123456789 Back PanelConnections VideoTypes of ON-SCREEN Displays and Display Sequence Buttons functionsSetting the Language and Clock Language SettingClock setting Day of week is set automaticallySelecting the On-screen Display Changing the ON-SCREEN DisplayChanging the Date/Time Display Position Video Cassette Tapes Record indicator a lights Recording starts Pause/Still indicator blinksNormal Recording Normal RecordingNormal Recording Recording CheckClog Detection Eject buttonSetting the Mode at the End of the Tape Alarm Mode setting is flashingRepeat LED will light Setting procedure is now completed Autorepeat RecordingAlarm Recording Alarm Recording SettingAlarm Recording Alarm Recording Counter DisplayConnections to the Alarm IN/OUT Checking the Alarm Recordings TimeAlarm Scan Playback will start, alarm scan mode is cancelledProgramme Timer Recording Programme Timer Recording Setting the HolidaysChanging a Programme Timer Recording To Cancel a Programme Timer Recording700PM 800PM 900PM 1000PM Programme Recording Using AN External Timer Input Normal Playback Normal PlaybackTracking Control Vertical Lock ControlSpecial Playback Picture SearchFrame Advance Still ImageSetting the Buzzer Setting the Security LockIs displayed on the digital display Checking Usage Duration To CondensationTape END OUT Terminal Output Setting Output TerminalsTape END OUT Terminal COM TerminalSW OUT Terminal Output Setting Output TerminalsSW OUT Terminal Remote JackMaintenance After a Power Failure Troubleshooting GuideSystem Down Specifications General SpecificationsNE4QG/EX
Top Page Image Contents