Sanyo TLS-224P instruction manual Recording Using AN External Timer Input

RECORDING USING AN EXTERNAL TIMER INPUT

Recording can be controlled by an external start/stop signal input at the EXT TIMER IN terminal.

Example 2: To record using the signal input at the EXT TIMER IN terminal, in 12-hour mode.

NOTE:

•External timer input recording can only be set on the 9th line (“EXT”) of the (TIMER SET) menu.

1Follow steps 1 to 3 under “PROGRAMME TIMER RECORDING” on page 17.

<TIMER SET>
WEEK START	STOP	SPD
SUN --:--	--:--	--- N
MON --:--	--:--	--- N
TUE --:--	--:--	--- N
WED --:--	--:--	--- N
THU --:--	--:--	--- N
FRI --:--	--:--	--- N
SAT --:--	--:--	--- N
DLY --:--	--:--	--- N	9th line
EXT ¤¤¤¤¤	¤¤¤¤¤	--- N

2Press the ] button, until “EXT” (External) setting is flashing.

°The “SPD” (recording speed) position will start flashing.

3Press the l (or j) button to select the recording speed (ex: 12), then press the « button.

°“N” will start flashing.

4Press the l (or j) button to select “Y”.

	<TIMER SET>
WEEK	START	STOP	SPD
SUN	--:--	--:--	--- N
MON	--:--	--:--	--- N
TUE	--:--	--:--	--- N
WED	--:--	--:--	--- N
THU	--:--	--:--	--- N
FRI	--:--	--:--	--- N
SAT	--:--	--:--	--- N
DLY	--:--	--:--	--- N
EXT	¤¤¤¤¤	¤¤¤¤¤	12 Y

5Follow steps H and I under “PROGRAMME TIMER RECORDING” on page 17.

°When an external signal is input, “E” will light on the digital display and recording will take place.

NOTES:

•Other timer recordings using the standard procedure can also be programmed.

•When there is a signal being input at the EXT TIMER IN terminal, “E” will be displayed on the digital display

and recording is conducted. GB

20 English