Sanyo TLS-224P instruction manual Programme Timer Recording

Page 18

PROGRAMME TIMER RECORDING

There are two programme timer recording methods, daily recording or recording on certain days of the week.

Example 1: To record on every Saturday from 9:00 AM to 5:00 PM (17:00), in

24-hour mode (recording speed).

1Make sure that the set date and time are correct.

2Load a cassette tape with erasure-prevention tab.

3Press the AUDIO ON/MENU button until the (TIMER SET) menu is displayed.

°“SUN” (Sunday) will be flashing.

GB

 

<TIMER SET>

 

WEEK START

STOP

SPD

 

SUN

--:--

--:--

--- N

 

MON

--:--

--:--

--- N

 

TUE

--:--

--:--

--- N

 

WED

--:--

--:--

--- N

 

THU

--:--

--:--

--- N

 

FRI

--:--

--:--

--- N

 

SAT

--:--

--:--

--- N

 

DLY

--:--

--:--

--- N

 

EXT

¤¤¤¤¤

¤¤¤¤¤

--- N

9Press the l (or j) button to set the recording stop minutes (ex: 00), then press the « button.

°The “SPD” (recording speed) position will start flashing.

FPress the l (or j) button to select the recording speed (ex: 24), then press the « button.

°“N” will start flashing.

GPress the l (or j) button to select “Y”.

Y. . . . . . . . . . . . . . recording will take place

N. . . . . . . . . . . . . . recording will not take place

 

<TIMER SET>

 

WEEK

START

STOP

SPD

SUN

--:--

--:--

--- N

MON

--:--

--:--

--- N

TUE

--:--

--:--

--- N

WED

--:--

--:--

--- N

THU

--:--

--:--

--- N

FRI

--:--

--:--

--- N

SAT

09:00

17:00

24 Y

DLY

--:--

--:--

--- N

EXT

ööööö

ööööö

--- N

4Press the ] button, until “SAT” (Saturday) is flashing.

5Press the « button.

°The recording start hour position starts flashing.

6Press the l (or j) button to set the recording start hour (ex: 09), then press the « button.

°The recording start minutes position starts flashing.

7Press the l (or j) button to set the recording start minutes (ex: 00), then press the « button.

°The recording stop hour position starts flashing.

8Press the l (or j) button to set the recording stop hour (ex: 17), then press the « button.

°The recording stop minutes position starts flashing.

NOTE:

If the set stop time is earlier than or the same time as the set start time, the VCR will consider the stop time to be the following day, and “T” will be displayed next to the recording stop time.

°Repeat steps 4 to G to programme timer recordings for other days of the weeks.

HPress the PAUSE/SCAN button, the normal screen is displayed.

IPress the TIMER button.

°The timer recording indicator nwill light on the digital display, the VCR is now in timer recording stand-by mode.

NOTES:

To modify, cancel or stop timer recording, press the TIMER button to cancel the timer recording mode.

A timer recording of more than 24 hours can only be set on the 7th and 8th lines. On the 7th line, set the recording start time and set “öö” for the rest of the line. On the 8th line, set “öö” for the START time position, then set the recording stop time, recording speed, and select “Y” or “N”.

To record everyday at the same time, at step 4 select the “DLY” line.

English

17

Image 18
Contents EnglishGB DeutschDPower on/stand-by mode PrecautionsMoisture Condensation Problems LocationFeatures ContentsLocations of Controls and Indicators Front PanelOperation Mode Indicator Locations of Controls and IndicatorsDigital Display Operation Indicators PLAY, STOP, FF or REW button123456789 Back PanelConnections VideoTypes of ON-SCREEN Displays and Display Sequence Buttons functionsClock setting Setting the Language and ClockLanguage Setting Day of week is set automaticallyChanging the ON-SCREEN Display Selecting the On-screen DisplayChanging the Date/Time Display Position Video Cassette Tapes Normal Recording Record indicator a lights Recording startsPause/Still indicator blinks Normal RecordingClog Detection Normal RecordingRecording Check Eject buttonRepeat LED will light Setting procedure is now completed Setting the Mode at the End of the TapeAlarm Mode setting is flashing Autorepeat RecordingAlarm Recording Alarm Recording SettingConnections to the Alarm IN/OUT Alarm RecordingAlarm Recording Counter Display Checking the Alarm Recordings TimeAlarm Scan Playback will start, alarm scan mode is cancelledProgramme Timer Recording Changing a Programme Timer Recording Programme Timer RecordingSetting the Holidays To Cancel a Programme Timer Recording700PM 800PM 900PM 1000PM Programme Recording Using AN External Timer Input Tracking Control Normal PlaybackNormal Playback Vertical Lock ControlFrame Advance Special PlaybackPicture Search Still ImageSetting the Security Lock Setting the BuzzerIs displayed on the digital display Checking Usage Duration To CondensationTape END OUT Terminal Tape END OUT Terminal Output SettingOutput Terminals COM TerminalSW OUT Terminal SW OUT Terminal Output SettingOutput Terminals Remote JackMaintenance Troubleshooting Guide After a Power FailureSystem Down Specifications General SpecificationsNE4QG/EX