NORMAL PLAYBACK
Normal Playback
1Turn on the power to the VCR and TV monitor.
2Load the video cassette tape.
3Press the REC/PLAY SPEED button to select the playback speed.
°The selected playback speed is displayed on the digital display.
Tracking Control
If there is noise in the image during playback,
1While looking at the playback picture, press and hold the TRACKING/V. STILL+ button to minimize the noise.
2If it cannot be minimized, press the TRACKING/V. STILL– button.
NOTE:
• A slow motion effect or accelerated playback effect can be achieved by using a slower or faster playback speed than the speed used for
Vertical Lock Control
During still image mode,
1 Press and hold the TRACKING/V. STILL+ button to |
GB
recording.
reduce the vertical rolling of the image. |
4Press the PLAY button.
°Playback starts.
°If necessary, adjust the tracking to eliminate the noise from the picture.
5To stop playback, press the STOP button.
°To advance or rewind the tape, press the FF or REW button.
NOTES:
•A tape recorded on a time lapse VCR produced by another manufacturer can not be played back on this unit.
•A tape recorded on this VCR cannot be played back on a time lapse VCR produced by another manufacturer.
2 If it cannot be corrected, press the TRACKING/V. |
STILL– button. |
Audio Playback
•The playback speed has to be the same as the recording speed, for normal playback of the audio.
•For a tape recorded in
modes, to playback the audio, press the AUDIO ON/MENU button after pressing the PLAY button. “?” will be displayed to the left of the playback speed on the digital display.
NOTE:
•Noise will appear in the image when audio playback is used in 12- or
English | 21 |