CONNECTING YOUR SATELLITE RECEIVER, VCR, AND TV
1.Connect a coaxial cable between the TV Set Out on the satellite receiver and the tuner input to the VCR (see Figure 4).
Note: If you connect your VCR a different way (for example, using yellow, red, and white audio/video
your VCR to pass satellite programming using 
will not work.
2.Look at the boxes you checked on page 8, 9,
and 11. If you checked a box next to “ 3,” write “ 3” in the blank below. If you checked a box next to
“ 4,” write “ 4” in the blank below. Channel
3.Make sure that the 
switches on the back of both your satellite receiver and your VCR are set to the channel you wrote down in step 2.
Note: If your satellite receiver does not have a 
switch, see your satellite receiver’s User’s Guide for how to set TV Set Out on the satellite receiver to the channel you wrote in step 2.
4.Connect a coaxial cable between the coaxial TV output connection on the VCR and the tuner input to the TV.
118866 | 15 |